ADATA XPG Mars 980 Blade 2 TB Review 30

ADATA XPG Mars 980 Blade 2 TB Review

(30 Comments) »

Introduction

ADATA Logo

ADATA is Taiwan's largest manufacturer of flash storage and DRAM memory. They have been at the forefront of SSD development for many years, bringing us famous drives such as the SX8200, Gammix S70 and Atom 50.



The ADATA XPG MARS 980 Blade is a high-performance PCIe 5.0 SSD built around the latest Silicon Motion SM2508 controller, which focuses on efficiency to help keep thermal output in check. This is the same controller we've seen in several other recent Gen 5 drives such as the WD Black SN8100, Acer Predator GM9000, Kingston Fury Renegade, and Lexar NM1090.

For NAND, ADATA pairs the SM2508 with Micron's 232-layer 3D TLC B58R flash, configured in a double-sided design with four NAND packages. The MARS 980 also integrates a 2 GB LPDDR4 DRAM cache, ensuring smooth handling of the SSD's internal mapping tables and sustained performance under heavy workloads.

The Mars 980 Blade is available in capacities of 1 TB ($100), 2 TB ($170) and 4 TB ($320). The endurance is set to 740 TBW, 1480 TBW and 2960 TBW respectively. ADATA includes a five-year warranty with the Mars 980 SSD.

Specifications: ADATA XPG Mars 980 Blade 2 TB SSD
Brand:ADATA XPG
Model:SMAR-980B-2TCS
Capacity:2048 GB (1862 GB usable)
No additional overprovisioning
Controller:Silicon Motion SM2508
Flash:Micron 232-layer 3D TLC / B58R
Rebranded as ADATA 600799DG
DRAM:2 GB Samsung DDR4-2666
K4A8G165WC‑BCTD
Endurance:1480 TBW
Form Factor:M.2 2280
Interface:PCIe Gen 5 x4, NVMe 2.0
Device ID:XPG MARS 980 BLADE
Firmware:Y0218A
Warranty:Five years
Price at Time
of Review:
$170 / $83 per TB

Packaging

Package Front
Package Back


The Drive

SSD Front
SSD Back

The drive is designed for the M.2 2280 form factor, which makes it 22 mm wide and 80 mm long.

SSD Interface Connector

PCI-Express 5.0 x4 is used as the host interface to the rest of the system, which doubles the theoretical bandwidth compared to PCIe 4.0 x4.

SSD Teardown PCB Front
SSD Teardown PCB Back

On the PCB you'll find the controller and four flash chips, two DRAM cache chips are included, too.


In the package, ADATA includes this heat spreader that attaches with sticky tape.


Unlike what many other vendors offer, this heat spreader is made from thick metal, it's not just a sticker with metal foil inside.


When installed, it looks very nice, I like the matte surface texture.

Chip Component Analysis

SSD Controller

The Silicon Motion Technology SM2508 controller is the company's first PCI-Express 5.0 controller for consumer applications. It supports PCIe 5.0 x4 and runs with eight flash channels at 3600 MT/s. SMI fabricates the controller using a 6 nanometer process at TSMC Taiwan.

SSD Flash Chips

The four flash chips are Micron 232-layer 3D TLC, rebranded to ADATA. Each chip has a capacity of 512 GB.

SSD DRAM Chip

Each of the two Samsung DRAM cache chips has a capacity of 1 GB and runs at DDR4-2666.

Test Setup

Test System SSD 2024
Processor:Intel Core i9-13900KS
Raptor Lake
6.0 GHz, 8+16 cores / 32 threads
Motherboard:ASUS ROG Z790 Dark Hero
BIOS 1102
Memory:2x 16 GB DDR5-6000
Graphics:PNY GeForce RTX 4080 Super Verto OC
Cooling:Valkyrie Syn 360 mm AIO
Thermal Paste:Arctic MX-6
Power Supply:Thermaltake Toughpower GF3 850 W
ATX 3.0 / 16-pin 12VHPWR
Case:darkFlash DRX70 White
Operating System:Windows 11 Professional 64-bit 23H2
VBS enabled (Windows 11 default)
Drivers:NVIDIA: 552.12 WHQL



Synthetic Testing

  • Tests are run with a 20-second-long warm-up time (result recording starts at second 21).
  • Between each test, the drive is left idle for 60 seconds, to allow it to flush and reorganize its internal data.
  • All write requests contain random, incompressible data.
  • Disk cache is flushed between all tests.
  • During these tests, M.2 drives are tested with additional active fan-cooling, to ensure thermal throttling can't happen.

Real-life Testing

  • After initial configuration and installation, a disk image is created; it is used to test every drive.
  • Automated updates are disabled for the OS and all programs. This ensures that—for every review—each drive uses the same settings, without interference from previous testing.
  • Our disk image consumes around 700 GB—partitions are resized to fill all available space on the drive.
  • All drives are filled with random data to 85% of their capacity. This is intentional, to run the drive in realistic operating conditions—nobody uses a nearly-empty SSD in their system. It also puts additional stress on the pseudo-SLC cache subsystem, because there is less free NAND space to work with.
  • Partitions are aligned properly.
  • Disk cache is flushed between all tests.
  • In order to minimize random variation, each real-life performance test is run several times, with reboots between tests to minimize the impact of disk cache.
  • All application benchmarks run the actual application and do not replay any disk traces.
  • Our real-life testing data includes performance numbers for a typical high-performance HDD, using results from a Western Digital WD Black 1 TB 7200 RPM 3.5" SATA. HDDs are significantly slower than SSDs, which is why we're not putting the result in the chart, as that would break the scaling, making the SSDs indistinguishable in comparison. Instead, we've added the HDD performance numbers in the title of each test entry.
  • During these tests, M.2 drives are tested with additional active fan-cooling, to ensure thermal throttling can't happen.
Our Patreon Silver Supporters can read articles in single-page format.
Nov 19th, 2026 00:39 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts