AMD Ryzen 7 9850X3D Review - The Best Just Got Better 173

AMD Ryzen 7 9850X3D Review - The Best Just Got Better

Performance Summary »

Clock Frequencies

The following chart shows how well the processor sustains its clock frequency and which boost clock speeds are achieved at various thread counts. This test uses a custom-coded application that mimics real-life performance—it is not a stress test like Prime95. Modern processors change their clocking behavior depending on the type of load, which is why we provide three plots with classic floating point math, SSE SIMD code, and modern AVX vector instructions. Each of the three test runs calculates the same result using the same algorithm, just with a different CPU instruction set.



Nice, a gradual reduction of frequencies as load increases. This is a definite improvement over the 9800X3D, which ran at 5.2 GHz all the time, no matter how many threads were active, losing some higher clock potential in the process. But this also means that the rated 5.6 GHz will only be achieved with single-threaded workloads.

Overclocking



While overclocking was disabled on the first-gen Ryzen 7000 X3D processors, this is fully supported on the 9000-series X3D models. One important development for this ability is that AMD has now placed the 3D V-Cache tile under the CCD with the CPU cores, instead of on top of it. This improves thermals, because heat doesn't have to travel through the X3D's cache silicon anymore.

As previous reviews have shown, the right way to overclock these processors is by using AMD Precision Boost Overdrive (PBO):
  • Set PBO mode to "manual."
  • Then, I removed all the power and current limits.
  • I also set +200 MHz with a scalar of x10.
  • Last but not least, I set Curve Optimizer to -20 all cores.
  • That turned out to be fully stable, so I set -25, -30, -35, -40 with quick stability testing at each setting.
  • At -40 the CPU was unstable, so I settled for -35.
  • The benchmark charts include a full run at this setting (blue bar).
Next Page »Performance Summary
View as single page
Nov 19th, 2026 05:52 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts