AMD Ryzen 9 7950X "Zen 4" is the fastest desktop processor you can buy right now. When our reviews of the Ryzen 7000 series went live last week, the buzz among tech forums and social media was surrounding its 95°C operating temperature, which the processor was found not just hitting quite often, but basically residing in, under nearly all serious processing loads. AMD made several statements around this temperature, the most notable of which, is that one shouldn't be alarmed with the 95°C load temperatures if the processor's basic cooling requirements are met, and should expect this to be its normal load temperature residency.
95°C is a mighty high temperature, especially for a processor built on the 5 nm node—the most advanced ever for an x86 processor. In their bid to outdo each other, both Intel and AMD have thrown traditional notions of "high" thermals and power-draw out of the window. Intel's flagship Core i9 "K" processors come with 125 W base power marked on the tin, but actual power limits set as high at 241 W for the 12th Gen Alder Lake, expected to go up to 253 W with Raptor Lake. AMD, on the other hand, has raised its TDP (base power) for its Ryzen 9 7000 series to 170 W on the box, but with a power limit of 230 W. AMD is sticking with the classic definition of TDP, and they set the cooler recommendations accordingly—at least a 240 mm AIO liquid cooler is recommended for the Ryzen 9 7000 series. But what if you gave these processors cooling below this recommendation? Will bad things happen? What about air-cooling?
Even with weaker cooling, the processor won't bug out with thermal-trips or emergency system shutdowns, provided you have some form of cooling. It will still hold on to the 95°C temperature at the highest possible clock speed. This in and of itself isn't new. When any chip hits its temperature limit, it either shuts down, or dramatically drops voltages and clock speeds to attempt to lower temperature; only that's not what is happening with Zen 4. The 95°C temperature doesn't necessarily cause the processor to freak out in any way. Instead 95°C is what the processor is trying to run at, by picking the highest possible boost frequency that doesn't cause the temperature to go over the 95-degree mark. Remember, this isn't a classic TJMax, but a load-temperature limit at which the processor begins to lower its highest boost frequency based on the cooling performance. Once you enable overclocking mode, the 95°C temperature target gets disabled and the CPU may run at up to 105°C, and only above that it will turn off automatically to protect itself—this is the real TJMax. We asked AMD, and they confirmed that at stock settings, increasing the 95°C temperature target isn't possible, you can only lower it.
In this article, we are running a Ryzen 9 7950X processor with cooling solutions below AMD's recommendation of a 240 mm AIO. This includes the Noctua NH-U14S, a highly capable air cooler with heatpipes; and the AMD Wraith Spire, a very basic in-box cooler that's rated for just 95 W TDP. Just to clarify, this is not the boxed cooler of the 7950X—AMD does not include a Wraith Spire (or any cooler) with the 7950X. The idea here is to see how the processor behaves in a "sub-par" cooling environment, whether it's capable of stable 24/7 use with air-cooling, just how much its boost headroom is affected with all this, and what its impact on performance is.
Test Setup
All testing in this article is performed using the Ryzen 9 7950X, which is the most powerful Zen 4 CPU available, with the highest heat output. AMD is very clear that the recommended cooling configuration is a "240-280 mm AIO", but we wanted to know what you really need and how it affects temperatures and performance. The rest of the platform is identical to the one in our Ryzen 9 7950X review.
The following cooling solutions were used in this article:
Arctic Liquid Freezer II 420 mm: this is the AIO that gets us the lowest temperatures, thanks to its Ryzen offset mounting mode, which moves the center of the cold plate away from the middle of the IHS, to sit on top of the compute dies instead.
Noctua NH-U14S: a typical "high-performance" air cooler.
AMD Wraith Spire: this cooler is bundled with various older AMD processors, and serves as example of an affordable mid-range cooler without heatpipes, or other advanced tech.
In order to simulate other cooling solutions from different vendors, with various capabilities, we're adjusting the fan speed on these two coolers using the motherboard's fan control. To clarify, the fan speed is set to a fixed percentage, there's no temperature-dependent regulation, to make it a fair comparison.
We're testing the following application workloads, which have been selected to cover a wide range of the power usage spectrum, at various threading levels:
Blender (235 W): a highly parallelized rendering application that fully loads all cores. This is the highest power consumption, higher than even Cinebench.
Cinebench single-thread (44 W): one of the most popular "quick and easy" benchmarking tests. In this scenario it's limited to running on a single-core only.
Cinebench multi-threaded (216 W): the benchmark that everyone uses these days. It uses the Cinema4D rendering engine, using as many cores and threads as the processor has available.
Visual Studio C++ Compile (90 W): testing a processor with just a highly parallelized software is like testing a car full throttle only. The vast majority of workloads today are actually mixed threaded, so sometimes they use a few threads, then they drop to one or two threads, and then spin up more again. That's the reason why our compiler test is part of this article.
Adobe Photoshop (67 W): the software that no creative mind can live without. Adobe products are not highly optimized to scale across all threads, even though some filters are optimized for parallelization. We run several images through a typical Photoshop workflow of various tasks and filters.
MP3 Encode (43 W): converting raw audio into highly compressed MP3, with minimal loss in quality is what powers all listening experiences today. This benchmark is purely single-threaded and serves to investigate real-life performance with just a single thread (I consider Cinebench 1T a "synthetic" test).
For gaming, we're running:
Counter-Strike Global Offensive (61 W @ 1080p): a highly popular multiplayer title that's very light in its graphics requirements and thus runs CPU limited all the time.
Cyberpunk 2077 (90 W @ 1080p): the engine is designed to use as many cores as possible and spread its workload accordingly. Highly GPU limited.
DOOM Eternal (112 W @ 1080p): this game has the highest CPU power consumption in our tests, but is also heavily GPU bound.
Far Cry 6 (77 W @1080p): Ubisoft's engine is very compute-intensive, but doesn't scale to all threads; it also puts lots of stress on the memory and inter-thread communication.
Temperatures
There's a huge difference between gaming temperatures and rendering, which isn't that surprising. No game can put as much stress on the CPU as highly parallelized workload—and most "normal" applications don't use as much power either.
With the AIO, temperatures are slightly below the 95°C temperature target that Ryzen 7000 operates at (it's a bit hard to see in the chart). The Noctua cooler will always run at 95°C in rendering, but gaming temperature gradually goes up as we adjust the fan speed. At 20% fan speed, the Noctua reaches 95°C in both gaming and applications.
The AMD Wraith Spire cooler reaches 95°C in both gaming and rendering, even at 100% fan speed, so I didn't include the other RPM settings, which would be 95°C/95°C, too. Great news, even with seriously weak cooling your processor will not overheat and not exceed 95°C.
If you wonder "how can the temperature always be 95°C, even at lower fan speed?" That's how Zen 4 is designed to operate. The CPU will aggressively boost clocks and voltage as long as it's below 95°C, and once it reaches that point it will carefully regulate the boosting to always stay at 95°C (the algorithm's target is "at", not above or below).