The snazzy design is backed up by onboard RGB lighting that extends along the lower heatsink, which is very large and cools the M.2 drives that sit between the two PCIe x16 slots. Cooling appears to be decent for the primary M.2 slot and VRMs too, and both M.2 heatsinks feature tool-free removal and installation, which is great to see. The downside to having such a large heatsink is that any size of discrete graphics card is going to block it, requiring removal of said card to access any SSDs installed underneath. There's also no additional cooling on the rear of the PCB, although that's somewhat rare at this price, and far from a dealbreaker.
Despite there being five M.2 ports, two PCIe x16 slots and one PCIe x1 slot in total, there's no bandwidth sharing, with most functions handled by the CPU or Z890 chipset. There are a couple of extra controllers for additional USB ports. The PCB has little free space despite featuring a single chip PCH solution—compared to the dual chipsets on an AMD X870E motherboard—as ASRock has decided to go all-out with five M.2 ports with plenty of expansion possibilities here.
There are eight 4-pin fan headers in total, with the usual CPU-dedicated headers and AIO pump header located at top of the PCB next to a pair of 3-pin ARGB headers. The secondary CPU header plus the rest of the fan headers can deal with up to 3 A/36 W combined, while the CPU header is limited to 1 A/12 W. If you plan on using a high speed external SSD then the front panel Type-C header offers USB 3.2 Gen 2x2 20 Gbps bandwidth. Unfortunately there's no enhanced power delivery here, which was present on the ASUS TUF Gaming Z890-Pro Wi-Fi with its 30 W output. As per the standard these days, there's four SATA ports.
There's another four 4-pin fan header at the bottom edge of the PCB, useful, especially if you have fans in the base of your case, which is an increasingly common feature. The bottom left corner offers a 2-pin thermistor sensor, a third 3-pin ARGB header and 4-pin RGB header, with the PCIe x1 slot located right at the bottom of the PCB.
The final fan header is located next to the primary PCIe Gen 5 M.2 slot, above the Wi-Fi module. Perhaps a little awkward to get to on the regular, but this makes connecting rear case fans a lot easier, something you'll likely only do once in a build.
The top M.2 port is catered for with a large tool-free heatsink with one on the underside to cool both sides of double-sided SSDs. The board doesn't offer any kind of enhanced GPU release mechanism, instead ASRock has simply cut away the M.2 heatsink fins at one end to provide easier access. It's not as easy as an extended lever or push-button, but likely saves some money, allowing ASRock to compete with a compelling price.
The lower heatsink is possibly the largest we've seen on any motherboard and cools the remaining four PCIe Gen 4 M.2 slots topside only. The release mechanism also works in the opposite direction as usual, the release mechanism clamps onto the PCH heatsink underneath and is attached to it with a thermal pad too.
With eight Type-A USB ports and the majority of those faster than USB 2.0, that's a decent amount given there's a pair of Type-C Thunderbolt ports for expansion, and only those with an unusually high amount of Type-A peripherals would need to purchase additional hubs. The rear I/O panel also offers a USB BIOS Flashback button, standard Wi-Fi antenna connectors, and 2.5 Gbps Ethernet, plus a pair of audio jacks and an optical output.