ASRock Z890 Taichi Aqua Review 19

ASRock Z890 Taichi Aqua Review

(19 Comments) »

Introduction

ASRock Logo


With most motherboards being more than capable of handling VRM heat even with high-end CPUs, it's no surprise that motherboard monoblocks and separate VRM water blocks are less popular these days. That hasn't stopped ASRock from working in partnership with Alphacool to add them to its flagship Intel Z890 board, though, and it's the Z890 Taichi Aqua that we're looking at today.



ASRock was keen for us to look at it despite LGA1851 being in its twilight days and major CPU launches likely to be in the rearview mirror. It's always a pleasure to test motherboards of this caliber, boasting 10 Gbps Ethernet, water-cooled VRMs, M.2 ports, and an army of Type-C ports on its rear I/O panel. Let's strap it to a water-cooled test system and see how it and its Alphacool water blocks perform.

Specifications

Specifications
CPU Support:Intel Core Ultra Series 2 (Arrow Lake)
Power Design: CPU Power: 28-phase/Renesas R2209004/110 A
iGPU Power:1-phase/Renesas ISL99360/60 A
VCCSA Power: 1-phase/Renesas ISL99360/60 A
VNNAON Power: 1-phase/Renesas ISL99360/60 A
Chipset:Intel Z890
Integrated Graphics: Supported
2x DisplayPort 1.4 via Type-C
Memory: 4× DIMM, Supports up to 256 GB
Up to DDR5-9600 (OC)
BIOS:256 Mbit (32 MB) AMI UEFI
Expansion Slots: 1× PCIe Gen 5 x16 slot (x16, x8/x8, x8/x4/x4)
1x PCIe Gen 5 x16 slot (x8)
1× PCIe Gen 4 x16 (x4)
Storage: 2× M.2 (PCIe Gen 5 x4)
4× M.2 (PCIe Gen 4 x4)
4× SATA 6 Gb/s
Networking: 1× Marvell Aquantia AQC113 10 Gbps Ethernet
1× Realtek RTL8126 5 Gbps Ethernet
1× Intel BE1750 Wi-Fi 7
Rear Ports: USB BIOS Flashback button
1× 10 Gbps Ethernet
1× 5 Gbps Ethernet
2× Thunderbolt 4 40 Gbps (Type-C)
4× USB 3.2 Gen 2 10 Gbps (Type-C)
4× USB 3.2 (Type-C)
2× Wi-Fi antenna connectors
2× Audio jacks
1× Optical S/PDIF Out port
Audio: 1× Realtek ALC4082 Codec
Fan / Thermistor headers:8× 4-pin /3
Form Factor: EATX Form Factor
12.0 × 10.8 in./30.5 × 27.4 cm
Exclusive Features:
  • VRM and M.2 water blocks
  • Graphics Card EZ Release

Packaging and Contents


The box does a good job of adding some flair to the package with an appropriately bold teal design, and emphasizes the Aqua branding of ASRock's popular flagship water-cooled board.


With so many M.2 ports on the PCB itself, expansion cards adding more is mostly a thing of the past, and it's the same here. ASRock focuses on the basics including an adhesive Wi-Fi aerial, 3-way 3-pin ARGB splitter cable, four SATA cables and three 2-pin thermistor cables. A noteworthy extra is a USB 2.0 bracket that adds two Type-A USB ports, which is needed as the rear I/O panel itself is USB Type-C only.

The full list of accessories is:
  • 1× Quick start guide
  • 1× Wi-Fi antenna
  • 4× SATA cable
  • 1× 3-pin ARGB splitter cable
  • 3× Thermistor probe cables
  • 1× USB 2.0 PCI bracket
  • 1× ASRock Sticker
Our Patreon Silver Supporters can read articles in single-page format.
Nov 18th, 2026 13:38 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts