Before we continue, just a reminder: the ROG Crosshair X870E Edition 20 is just half the bundle you get. The other half is the ROG Ryujin 360 AIO Edition 20 cooler. As with anything in the Edition 20 line-up, the cooler isn't simply a re-brand of an existing product. It is a beast of an AIO, with a custom cooling block—made specifically for the X870E Edition 20—paired with an unusually thick radiator.
Obviously the most interesting portion of the cooler is the copper block. It is massive and thus quite heavy. ASUS even took the opportunity to use the thermal paste application as another opportunity for branding. The block is much larger than it needs to be, as it interfaces with the copper component present on the motherboard on top of the VRMs using pre-installed thermal pads. Thanks to the four pre-installed mounting screws, all you need to do is remove the plastic brackets of the AM5 socket to then install the block. Doing so also connects the push pins to the pads on the motherboard, probably making this the easiest AIO install you have ever done. The thick radiator is thoroughly branded in Edition 20 livery on both sides. It features a single proprietary cable to connect the three 120 mm fans in a clean and easy fashion.
The other major component of the AIO is its massive, curved screen assembly. It ships in its own dedicated box, protected by foam on all sides. As it is unique to the Edition 20 cooler, you will find a plastic film with the branding on it right out of the box. We actually avoided peeling off any of these protective layers for as long as possible because this whole build is so unique and special.
The screen features a tilt mechanism, so you may change its angle slightly to face you directly when sitting next to the fully built system.
Of course, the screen assembly goes beyond simple branding, sporting a cool banner on the side facing the rear when installed within a system, along with plenty of details all around. It is clear that ASUS really hopes that you will install this in an open frame case, as there are no bad viewing angles by design.
The three 120 mm ARGB-equipped fans ship attached to each other, so you don't even have to do that step during assembly. While it would have been perfectly acceptable if all the hubs had the Edition 20 Eye branding on them. ASUS decided to create two variants of the same fans, so that the center unit would sport different branding - once again underscoring the focus on detail.
Each of the fans has clips and six pins on one side, with the ends sporting plastic covers to hide that mechanism for a clean finish. The ARGB elements in the frame are focused on the corners and side edges.
On the edges, there is even more special branding in the form of the recurring ROG glyphs we have seen on various Republic of Gamers products in the past. Naturally, these are in gold again, to match the Edition 20 visuals of the rest of the chassis.
Even the accessories box for all the screws and small parts is of high quality, with small compartments and useful permanent storage. Odds are high that you will simply keep this close somewhere in a drawer, because these small components are boxed up so nicely.