Packaging and Accessories
Each power variant in this series gets its own unique packaging with the power rating printed front and center. The design is sleek and minimalistic, with only the core information showing.
Straightaway upon opening we are presented with the manual which covers all 3 power variants, and the lid to the accessories box. Removing the lid and top foam block exposes the accessories and power supply facing fan-up.
All the included internal cables are sleeved in black. The sleeving on the cables ends quite far from the connector, so in a heavily cable-managed build you will likely just see the wires. This does help them to be bent into tighter angles though for routing.
Cables
| Modular Cables |
|---|
| Cable type | Connectors per cable | Length | Cable count |
|---|
| MB (20+4 pins) | 1 | 600 mm | 1 |
|---|
| CPU (8/4+4 pins) | 1 | 700 mm | 2 |
|---|
| PCIe (6+2 pins) | 2 | 600 mm | 2 |
|---|
| 12V-2x6 (12+4 pins) | 1 | 600 mm | 1 |
|---|
| SATA | 4 | 600+150+150+150 mm | 2 |
|---|
| SATA | 3 | 600+150+150 mm | 1 |
|---|
| SATA/Molex | 4 (2 SATA + 2 Molex) | 600+150+150+150 mm | 1 |
|---|
There is enough cabling here to be sufficient for most mid to mid-high setups, although if using a GPU with three or more power connectors you wouldn't be able to run a dedicated wire per connector, which isn't ideal. For an 850 W system though this shouldn't be too much of an issue, also considering the prevalence of single cable 12V-2x6 connections in higher wattage GPUs.
None of the cables feature any capacitors/ferrite for ripple/noise suppression.