Kaby Lake CPUs tend to run pretty hot, so to deal with that, I am running Turbo clocks, varied from 4.7 GHz to 5.0 GHz. My CPU is capable of more, but my cooling is not. This is part of the fun of having a new Intel CPU; you can set the multiplier based on workload in order to optimize temperatures and power consumption.
The Biostar Z270GT8 isn't the best overclocking platform on the market today. I had to use slightly elevated CPU voltages, and my memory would not boot at 3866 MHz at all (although the Z270GT8-supported 3600 MHz memory speed worked perfectly fine). Memory support is largely dependent on BIOS support, and this board lacks any support at all for real high-end DDR4 sticks. For a board of its cost, attempting to be what seems to be a high-end board with overclocking features, this is not acceptable.
You do get a nice POST display to diagnose boot issues, and there is an LN2 switch here on the Biostar Z270GT8 too, but why would you bother using such features without that high-end memory support when there are other boards that cost less and do a far better job?
There is the dual-BIOS implementation, ready for easy recovery should things go wrong, terribly wrong. However, these days, many boards feature "crashless" BIOSes that can recover themselves easily if settings are wrong, but that does not seem to be the case here. While overclocking the Biostar Z270GT8, I have had to make use of a screwdriver to short out the "Clear CMOS" header quite a few times. The redeeming bit of it all is that if you are a "normal" user and just want to push your system for the long term without going all crazy with high RAM speeds, the Biostar Z270GT8 is ready and willing, and the high-quality components we do not normally see on Biostar boards do make it a decent option for daily OC'd use. Just don't expect to be breaking any memory frequency records.