Bitspower Touchaqua NJORD 120 PWM Fan Review 2

Bitspower Touchaqua NJORD 120 PWM Fan Review

(2 Comments) »

Introduction

Bitspower Logo

Bitspower introducing fans under their brand was equally as surprising to me as seeing their LN2 block this time last year at CES 2019. While both are definitely hardware associated with cooling, with the former an integral part of PC cooling in general, the company was busy churning out more fittings in variations than any other company, perhaps even several combined, to where that cash cow was no doubt integral to their plans. Things have changed a lot in the past 12 months, however, with mainstream companies getting into the custom water cooling market and Bitspower bringing their more budget-minded Touchaqua brand out of Asia. They now have two different fan designs, both called NJORD and differentiated by the rotor design, and today, we take a look at the first of these. Thanks to Bitspower for sending a review sample to TechPowerUp!


The Bitspower Touchaqua NJORD, presumably named after the Norse god of the wind, is only available as a triple pack and has been the subject of multiple review requests from readers to date. No doubt the pricing of the product is a big factor, which we will get into in due time, but people are also simply curious about how these perform given the established presence the Bitspower brand has in this market. As the preview image above shows, these are RGB fans as well, with most of the company's new water blocks also embracing integrated addressable digital RGB LEDs, and we begin the review with a look at the specifications in the table below.

Specifications

Bitspower Touchaqua NJORD 120 PWM Fan
Dimensions:120 x 120 x 25 mm
Rated Speed:800–2000 (+/- 10%) RPM
Max Airflow:70 CFM (119 m³/h)
Noise:29 dBA
Fan Control:4-pin/PWM control
Current Draw:0.24 A peak
Warranty:One year

Packaging and Accessories


Packaging for these Touchaqua NJORD fans follows the Touchaqua white and blue color scheme, which contrasts with the black and blue Bitspower tends to use. This is a triple pack of fans, appropriately sized with the company and product name on the front and a note on a fan hub and LED controller included with the fans, as well as the LEDs being compatible with the onboard control from mainstream motherboard makers. On the back are the fan specifications as well as a QR code that takes you to the installation manual found on the product page—not that you need it for fans to be installed on a radiator.


Opening the box, we see the promised two accessories right away, located above the fans. These include a powered fan hub capable of driving as many as ten of these fans off a full-sized SATA connector from the PSU and a 2-pin PWM control header leading to the motherboard or other PWM controller. The second is their RGB multifunction controller we have used before with their CPU blocks. As seen above, these are paired with the necessary cables.


The fans themselves come individually packed in a plastic zip-lock pouch, of which there are three in total, and each fan has a set of four self-tapping metal screws included in case you plan to use them as case fans. For the sake of this review, they will be tested as radiator fans, so we will be using the ~30 mm screws provided with the radiator itself. Not much else to see here, although the inclusion of the fan hub and LED controller is more than what most provide for value-oriented fans.
Our Patreon Silver Supporters can read articles in single-page format.
Nov 18th, 2026 00:22 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts