Club3D HD 7850 Royal Queen 1 GB Review 19

Club3D HD 7850 Royal Queen 1 GB Review

Performance Summary »

Fan Noise

In the past years, users would accept everything just to get more performance. Nowadays, this has changed and users have become more aware of the fan noise and power consumption of their graphic cards.
In order to properly test the fan noise that a card emits, we use the Bruel & Kjaer 2236 sound level meter (~$4,000) which has the measurement range and accuracy we are looking for.

The tested graphics card was installed in a system that was completely passively cooled. That is, passive PSU, passive CPU cooler, and passive cooling on the motherboard and on a solid state drive.
This setup allows us to eliminate secondary noise sources and test only the video card. To be more compliant with standards like DIN 45635 (we are not claiming to be fully DIN 45635 certified), the measurement was conducted at 100 cm of distance and 160 cm over the floor. The ambient background noise level in the room was well below 20 dBA for all measurements. Please note that the dBA scale is not linear but logarithmic. 40 dBA is not twice as loud as 20 dBA. A 3 dBA increase results in double the sound pressure. The human hearing perception is a bit different and it is generally accepted that a 10 dBA increase doubles the perceived sound level. The 3D load noise levels were tested with a stressful game, not Furmark.

Fan noise in idle mode was greatly reduced compared to the reference design. In that state, the HD 7850 RoyalQueen will be basically inaudible. Under load, the fan speed increased a bit, resulting in more noise, but the card is still a lot quieter than the AMD reference design. Good job Club3D!

Next Page »Performance Summary