Corsair Dominator Platinum RGB DDR5-6600 CL32 2x 16 GB Review 60

Corsair Dominator Platinum RGB DDR5-6600 CL32 2x 16 GB Review

(60 Comments) »

Introduction

Corsair Logo

Corsair should be a well-known brand name by this point in the United States and Europe thanks to the easily identifiable yellow boxes. The company is well established in the computer market for a number of years now, offering gaming peripherals, flash drives, SSDs, AIOs, power supplies and entire pre-built computers. Of course, let's not forget about the highly successful memory division. Corsair is also one of the few brands that took the leap and offer DDR5 during the first few months despite global supply chain issues.

With the AMD imminent upcoming release for its new processors, DDR5 will be exiting the early adoption phase shortly after. Throughout 2023 we will see that the prices will continue to decrease as the market shifts to higher DDR5 sales. If you are reading this after AMD new processors are out, you will have no choice but to use DDR5 for Zen 4 (AM5) based systems. For those Intel owners, 12th and 13th Gen Core processors share DDR4 support as well. For the casual user, leaving behind DDR4 isn't always beneficial. This is only a quick reminder that DDR5 may not be worth the transition just yet. For those who want an in-depth look into the trade-offs between the two, TechPowerUp already has an article with an in-depth comparison of DDR4 and DDR5 performance using Intel Alder Lake CPUs.


Corsair currently offers an assortment of memory products ranging from laptop DDR3 SODIMMs to PC enthusiast grade DDR5 memory. Using the well established DDR4 memory lines, Corsair brings forward both Vengeance and Dominator products reusing the names and overall design blueprints for the next iteration. Both products are available in RGB, with the Vengeance series offering non-RGB memory kits as well. Configurations include 32 GB (2x 16 GB) and 64 GB (2x 32 GB) kits with frequencies ranging from 5200 MT/s to 6600 MT/s. In this review, we will be taking a closer look at the Corsair Dominator Platinum RGB DDR5-6600 memory kit. Using ultra-low timings of 32-39-39-76 operating at 1.4 V for the 6600 MT/s X.M.P profile, it brings higher bandwidth and considerable performance gains compared to the baseline JEDEC 4800 MT/s DDR5 with a CAS latency of 40 operating at 1.1 V. Marketed towards PC enthusiasts, we will benchmark this this Corsair Dominator Platinum RGB DDR5 32 GB kit and see how it stacks up to the competition along with some overclocking as well!

Specifications

Specifications
Manufacturer:CorsairCorsair
Model:CMT32GX5M2X6600C32CMT32GX5M2X6600C32
XMP Profile:XMP-1JEDEC
Speed Rating:DDR5-6600 MT/sDDR5-4800 MT/s
Rated Timings:32-39-39-76-11540-40-40-77-117
Tested Capacity:32 GB (2x 16 GB)32 GB (2x 16 GB)
Tested Voltage:1.4 V1.1 V
Registered/Unbuffered:UnbufferedUnbuffered
Error Checking:ECC (resting)ECC (resting)
IC Manufacturer:HynixHynix
Form Factor:288-pin DIMM 288-pin DIMM
Warranty:Limited LifetimeLimited Lifetime

Packaging


The Corsair Dominator series has gone through a few iterations over the years, but kept this same box design since DDR3. Only with DDR4 did the Dominator Platinum gain RGB lighting, which carries the name forward. Corsair's memory packaging is fairly straightforward. The front depicts a larger than life photo of the Dominator Platinum RGB memory inside. In the top right corner is the rated speed for the XMP profile and the kit size. In this case it is DDR5-6600 in a 2x 16 GB configuration listed on the box.

One thing to note is Corsair only supports RGB lighting control through its iCUE software. ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome Sync support badges are absent and are not supported.

The only mislabeling can be found here is something actually quite common. This memory kit isn't operating at 6600 MHz. Surprise! With software reporting 3300 MHz, this can lead to some confusion for casual users who are not particularly up to date with all things tech related. Whatever way you slice it, if you are just learning about system memory or well versed in all things computer related, this memory kit has an XMP profile of 6600 Megatransfer per second (6660 MT/s) with an effective clock of 6600 MHz. Corsair isn't the only one to blame either, because motherboard vendors will often convey the DDR frequency in multiple ways as well. It is simply easier to market a higher number than the actual operate frequnecy. It just cannot have the incorrect denomination if using this marketing strategy. Acceptable alternatives would be DDR5-6600 or 6600 MT/s and it wouldn't be a hard transition to make either.

With that rant out of the way, it's back to look at the box. Flip it around and the rear has a few marketing statements in multiple languages. One big barcode and SKU number. The last thing to talk about here is the cutouts for each DIMM. You can physically see the memory identification sticker with XMP timings, product SKU, DIMM configuration and revision number. This is a great way to know exactly what is inside and leaves little to know guess work to what is in your hands before opening and breaking that product seal.


Removing the memory from the box only requires cutting some tape—the memory sticks are secured and protected from minor damage with a clamshell inside the outer box.
Our Patreon Silver Supporters can read articles in single-page format.
Nov 22nd, 2026 12:11 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts