Introduction
Corsair is a US-based peripherals and hardware company founded in 1994. It is now one of the leading manufacturers for gaming gear, with a portfolio spanning nearly every component you need: DRAM memory modules, flash SSDs, keyboards, mice, cases, cooling, and much more.
Today we're reviewing the Corsair MP600 Core XT, which is the company's newest cost-optimized value SSD targeted at situations where every dollar matters. Just like its predecessor, the MP600 Core (without "XT"), you're getting support for PCI-Express 4.0, and QLC NAND flash in the M.2 2280 form factor. The biggest difference is that instead of the Phison E16 controller on the non-XT, the XT drive in today's review uses the more modern Phison E21 controller, which we've seen on drives like the Kingston NV2. Since the E21 adds support for DRAM-less operation, Corsair decided to get rid of the DRAM-cache. This lets them save a few dollars and position the drive more aggressively price-wise.
The Corsair MP600 Core XT is available in capacities of 1 TB ($60), 2 TB ($115) and 4 TB ($285). Endurance for these models is set to 250 TBW, 450 TBW and 900 TBW, respectively. Corsair includes a five-year warranty with the MP600 Core XT.
| Specifications: Corsair MP600 Core XT 2 TB SSD |
|---|
| Brand: | Corsair |
|---|
| Model: | CSSD-F2000GBMP600CXT |
|---|
| Capacity: | 2048 GB (1863 GB usable) No additional overprovisioning |
|---|
| Controller: | Phison E21T |
|---|
| Flash: | Micron 176-Layer 3D QLC N48R IA7HG96AZA |
|---|
| DRAM: | N/A but 32 MB HMB |
|---|
| Endurance: | 600 TBW |
|---|
| Form Factor: | M.2 2280 |
|---|
| Interface: | PCIe Gen 4 x4, NVMe 1.4 |
|---|
| Device ID: | Corsair MP600 CORE XT |
|---|
| Firmware: | ELFMC1.0 |
|---|
| Warranty: | Five years |
|---|
Price at Time of Review: | $115 / $58 per TB |
|---|
Packaging
The Drive
The drive is designed for the M.2 2280 form factor, which makes it 22 mm wide and 80 mm long.
PCI-Express 4.0 x4 is used as the host interface to the rest of the system, which doubles the theoretical bandwidth compared to PCIe 3.0 x4.
On the PCB you'll find the controller and four flash chips, a DRAM cache is not present.
Chip Component Analysis
The Phison PS5021-E21 is Phison's newest PCI-Express 4.0 controller. It's a cost-optimized model, with four flash channels and support for TLC and QLC NAND. Phison has designed the E21 for DRAM-less operation, and it supports the NVMe 1.4 protocol. The controller itself is fabricated using a 12 nanometer process at TSMC Taiwan.
The four flash chips are Micron 176-layer 3D QLC NAND. Each chip has a capacity of 512 GB.
Test Setup
Synthetic Testing
- Tests are run with a 20-second-long warm-up time (result recording starts at second 21).
- Between each test, the drive is left idle for 60 seconds, to allow it to flush and reorganize its internal data.
- All write requests contain random, incompressible data.
- Disk cache is flushed between all tests.
- M.2 drives are tested with a fan blowing on them; that is, except for the results investigating uncooled behavior on the thermal testing page.
Real-life Testing
- After initial configuration and installation, a disk image is created; it is used to test every drive.
- Automated updates are disabled for the OS and all programs. This ensures that—for every review—each drive uses the same settings, without interference from previous testing.
- Our disk image consumes around 600 GB—partitions are resized to fill all available space on the drive.
- All drives are filled with random data to 80% of their capacity
- Partitions are properly aligned.
- Disk cache is flushed between all tests.
- In order to minimize random variation, each real-life performance test is run several times, with reboots between tests to minimize the impact of disk cache.
- All application benchmarks run the actual application and do not replay any disk traces.
- Our real-life testing data includes performance numbers for a typical high-performance HDD, using results from a Western Digital WD Black 1 TB 7200 RPM 3.5" SATA. HDDs are significantly slower than SSDs, which is why we're not putting the result in the chart, as that would break the scaling, making the SSDs indistinguishable in comparison. Instead, we've added the HDD performance numbers in the title of each test entry.