CPS PCCooler YS1200 Review 15

CPS PCCooler YS1200 Review

(15 Comments) »

Value and Conclusion

  • The YS1200 typically retails around US$199/£170/€185.
  • Very low ripple across all rails
  • 100% Japanese 105°C capacitors
  • Selective conformal coating on sensitive PCB areas
  • 160 mm chassis fits easily in standard cases
  • 10-year warranty
  • 90-degree PCB solder tabs on daughterboard lack structural support
  • Fan gets loud (47.9 dBA) at high loads
  • Slightly missed 80 Plus Gold 50% efficiency mark on 230 V bench
  • 5 V and 3.3 V rails slightly over-volt at zero and low loads
  • Limited regional availability
The PCCOOLER CPS YS1200 marks one of the brand's entries into the high-end power supply market. It delivers 1200 W comfortably and satisfies ATX 3.1 and PCIe 5.1 specs. The casing measures 160 mm long, making it easy to fit into most ATX enclosures, and the flat, individually separated cables route cleanly without needing extra sleeving.

Looking at electrical performance, ripple control is low across all rails, remaining well within ATX spec limits even at 110% load. Efficiency peaks above 91% in the 30% to 60% load range where a system spends most of its time. On our 230 V test bench, the unit missed 80 Plus Gold compliance slightly at 50% load (91.71% measured versus 92% required), but performance remains acceptable although not exceptional overall. Voltage regulation is set high out of the factory, which keeps the 12 V rail stable at the load end under heavy draw, and though the minor rails rest slightly above tolerance at zero load, this almost certainly won't result in any real world issues.

Inside, component selection is generally good. You get 100% Japanese 105°C electrolytic caps, and targeted conformal coating on high-impedance areas of the main board to protect against dust and humidity. However, the modular interface connects to the main PCB using 90-degree solder tabs; this joint style lacks mechanical support, so users should take care not to apply excessive force when attaching tight modular cables.

Acoustically, the 135 mm FDB fan stays off at low power draw and runs quietly up to 60% load. Once the PSU is stressed to 100% and 110% load, the fan profile ramps up sharply, reaching a loud 47.9 dBA. This will only be an issue if used in an extremely stressful hot environment where noise also needs to be kept at a minimum. But if you care about noise when gaming this is not a particularly quiet PSU.

The CPS YS1200 offers strong voltage stability, low ripple, and a 10-year warranty at a fair price. Regional availability may be an issue, but the unit performs well for a high-wattage build if you can find one on sale.
Discuss(15 Comments)
View as single page
Nov 19th, 2026 16:20 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts