darkFlash DY460 Review 3

darkFlash DY460 Review

Review System Setup »

A Closer Look - Inside


To gain access to the interior of the darkFlash DY460, you simply have to unscrew the two side panels which are held in place by thumb screws. You could also detach the front glass and lower cover on the main side, but for the vast majority of builds that is not necessary. The shroud surface at the bottom of the case is made of metal and offers space for three fans. That is also why the side element under the main glass panel is vented, so that there is some access to fresh air, should you opt to install intake units here. Two well-placed openings will allow for functional cable routing, but we would have loved to see grommets here for the cleanest looks possible.


As the DY460 is capable of holding boards of up to ATX size, including microATX and ATX variants with reverse connectors, you will find all the cutouts present. On the back of the motherboard tray, three simple, but nice & long Velcro strips have been pre-installed, so you should have no issues bundling all your wiring together.


On the floor of the chassis, the metal storage cage needs to be removed to install any of the drives. It can hold a total of three drives - two 3.5" variants and one 2.5" unit. That is generally sufficient for most builds these days, especially considering the prevalence of SSD only systems. Above that you will find three more fans, this time with reverse blades to pull in air from the outside into the chassis while still showing off the pretty side to the user. These are the INF34R units with embedded ARGB elements in the frame of the units, utilizing magnetic connectors to easily daisy-chain them together. Thanks to this, you will only have a single wire to deal with for all three units. Lastly, the darkFlash INF34 series fans are available separately in retail, so you should be able to buy additional ones to fit inside the DY460 if needed.


In the rear, the PSU bay sports two foam strips on which the power supply will rest. There is ample room for units of up to 200 mm in length, so you should have no issues utilizing the one of your choice unless you are hoping to go to the extreme. Above that, the expansion slots are held in place by classic screws and in the very top, you will find a fourth pre-installed fan of the same INF34 model, but with a classic blade layout to push air out the back of the DY460. While these fans will certainly look great when running, it is worth noting that the thicker frame and bigger hub also means less airflow and static pressure than other 120 mm fans. The INF34 series is listed moving 50.43 CFM while you will find many other fans 60 or 70 CFM instead.


As the darkFlash DY460 focuses on the use of 120 mm fans except for the rear exhaust, it is no surprise that the ceiling also allows just 120 mm variant, or a radiator of up to 360 mm in size.


All the wiring within the darkFlash DY460 is black to match the case, but those buying the white variant will also get to enjoy white cables. It is good seeing flat-band cables for the USB ports, as that makes for tighter bend radii when paired with BTF equipped motherboards, however it would have been nice to have one unified connector to make that step of the assembly process as easy as possible.
Next Page »Review System Setup
View as single page
Nov 20th, 2026 13:47 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts