There's a lot going on inside the Air Power G10, but we can see cut-outs for both ATX and microATX rear-connector motherboards. The key features you'll need to familiarize yourself with, though, are the PSU and fan mount enclosures both located in the base. These can swap around, with the PSU mounted laterally. The fan enclosure should be moved to where airflow is most advantageous for your GPU, although there's only one spare fan included, which is a shame. Due to the way the PSU is mounted, the length limit here is just 160 mm.
Cable management is reasonable, with several Velcro ties pre-installed and several more included in the box, although there are limited places to add more so they're mostly for tying up bunches of cables. The fans are daisy-chained together with separate 4-pin PWM fan and 3-pin ARGB connector sections for you to connect to your motherboard or controller. The problem is the connectors are at the end of relatively short lengths of cables, and it was only because we used a rear connector motherboard that we didn't run into problems with cable length here.
The three front fans' unique mounting system means there's no way to install a radiator here, and it's only the roof that can house one. The eagle-eyed out there will also have spotted that with the fans angled there are large openings around them that are unguarded against dust, although the positive air pressure with the case's standard layout should prevent too much ingress. The side fan mounts allow for two 120/140 mm fans to be installed, and next to this is a large CPU cut-out above two 2.5" storage mounts. To the right of those we have a row of plastic cable anchors designed to route the 8-pin CPU power cable.
At the base of the case are two removable fascias that provide access to the PSU, plus its and the fans' enclosure and securing screws. This all needs to be removed to build a PC into the case. There's no vertical GPU support, but this would be largely pointless given the glass side panel. GPU clearance stands at 420 mm while CPU cooler height can be up to 182 mm.
There's plenty of space for 360 mm radiators with clearance at either end, and expecting a removable roof section at this price is maybe a little optimistic. Cables are the usual items with USB Type-C, a USB 3.0 header for the two Type-A ports, an audio header, alongside the addition of 4-pin PWM fan and 3-pin ARGB for the daisy-chained fans.