Packaging and Accessories
The box design is sleek, with a dark tone, purple accent and a close-up image of the styling on the side of the PSU.
On the rear of the box, we can see the specs and contents for some lower-rated models, which are not relevant to us.
The underside of the box lists specs and contents for the rest of the models in this series, including the one we have, which is marked with a purple sticker.
On opening the box we are greeted with the supply wrapped in a smooth plastic bag, a multi-language user manual, and a cardboard box of cables. Also included are four cable ties, and four screws to mount the supply to the case.
Cables
| Modular Cables |
|---|
| Cable type | Connectors per cable | Length | Cable count |
|---|
| MB (20 + 4 pins) | 1 | 600 mm | 1 |
|---|
| CPU (4 + 4 pins/8 pins) | 1 | 650 mm | 2 |
|---|
| PCIe (6 + 2 pins/8 pins) | 1 | 600 mm | 3 |
|---|
| 12V-2x6 (12 + 4 pins) | 1 | 600 mm | 1 |
|---|
| SATA | 4 | 450 + 150 + 150 + 150 mm | 2 |
|---|
| Molex | 3 | 500 + 150 + 150 mm | 1 |
|---|
This 1200 W supply comes with enough cables to run a high-end build within its power band; an overclocking motherboard utilizing twin 8-pin CPU connectors, a single GPU using either a single 12V-2x6 or x3 8-pin PCIe connectors, and enough SATA/Molex connectors for most desktop setups.
Once again we are seeing textured cables in favor of sleeving, however the difference with these from Formula V is that the individual wires are adhered to keep them together and flat. They can be easily pulled apart if desired. I personally feel this is a much better solution than having the wires left separate as with the FSP MEGA GM 1000 W. It will make pulling cables through gaps easier than having the fixed blocks that the MSI MPG Ai1600TS uses, or cable ties with the ASRock SL-1200P.
The texture used is a snakeskin style pattern, with a smooth gloss finish.
The labeled split connectors clip well and stay together while being plugged in.
The 12V-2x6 cable has some wrap around the cable at both connectors, which doesn't look the tidiest, but this will be to keep the four smaller sense wires safe, as they are not adhered to the larger gauge wire.