Out of the box it is very apparent that this case belongs to the Meshify series, thanks to the signature front mesh design that mimics that of a rock surface. The top and bottom edges of the body are tapered to fit that front design and by bulging the mesh out a bit, Fractal adds some further depth to the case. The biggest issue with the case, and what could be a dealbreaker for most is the fact that the Meshify 3 is not a successor to the Meshify 2 as the name may imply. Instead, it is far more aligned to replace the Meshify 2 Compact due to its size. The Meshify 3 XL on the other hand is larger than the original Meshify 2. So it feels like the 3rd generation of these cases is really missing a proper case in the middle.
While it is subjective, Fractal has done an excellent job with the design details when looking at the front. The three Momentum 14 RGB fans are placed in such a way that allows you to see them clearly behind the mesh layer. These are FDB equipped units, which are made of high stiffness LCP (Liquid Crystal Polymer) blades and sport a unique design that is meant to reduce their noise level at higher RPM. A triple-pack of these fans retails for $80, which is one reason this variant of the Meshify 3 has a retail price of $220. These cooling units can easily be accessed by pulling off the front cover. Fractal uses mounting frames, so you can remove all three fans at once by detaching the rails on either side of the frame. If you plan to install smaller units or an AIO, you may simply flip these rails over. In the rear it is apparent that the Meshify 3 Ambience Pro RGB sports a traditionally modern layout, but offers large venting holes, so that the internal airflow is not impeded - meaning the air that is pushed across the components from the units in the front can pass out the back with as little obstruction as possible.
Both side panels are held in place by plastic clips and have a pull-tab for easy removal. If you look at the image of the rear above, Fractal has also included screw holes, so you can add an extra measure of security if need be. The main panel is made of very gently tinted glass, while the opposing panel is all steel. Fractal has really paid a lot of attention to detail, as the underside and feet are seamless parts of the overall design.
As this is the Ambience Pro variant of the Meshify 3, that means there are two embedded RGB elements inside the body of the case. One is a ring of 76 LEDs around the mesh element of the front, which uses four pogo pins to easily connect to the chassis wiring. The other, not immediately apparent, light source is a LED strip consisting of 24 lighting elements alongside the bottom edge of the glass, which will light up as well. In other words, the Ambience Pro RGB variant of the Meshify 3 has 100 embedded LEDs.
In the rear, starting at the bottom, there is the PSU bay, which sports a mounting frame, as you are meant to slide the unit in through this part of the case. Above that, the Meshify 3 Ambience Pro RGB comes equipped with seven bridgeless expansion slots. These are protected by individual covers, which in turn are secured by thumb screws underneath the plastic cover. The Meshify 3 does not allow for these slots to be rotated for vertical GPUs, which is a shortcoming when compared to many other cases in this price segment. In the very top there is a vent which is actually able to hold a 120 mm fan. The cutouts are designed in a way to also align as mounting holes - another fun detail. Lastly, worth mentioning is the silver tab at the very top, which allows you to pull off the top cover easily.
Speaking of the cover, it is made mostly of a mesh surface on top of a sturdy plastic frame. The front section where the IO is located is made of solid metal on top that. Pulling it off reveals a mounting frame for either two fans of up to 140 mm in size or an AIO of up to 280 mm dimensions. It is removable so that you can easily prep complex cooling outside the confines of the chassis. While 280 mm is just fine, those wanting to go for a 360 mm unit will have to install it in the front of the case instead. The IO panel on the Fractal Design Meshify 3 series is placed as symmetrically as possible and provides all the usual connectivity for a case in this price segment. The circular power button is framed with an RGB lighting element, which is one more nice little detail we rarely see in cases.
On the underside, there is just a fine mesh dust filter and the presence of two sets of 2.5" mounting holes on the floor of the chassis. You may pull the cover out the side of the case, which is by far the best way to get to such a layer when placed at the back half of a chassis. Fractal went as far as to design it so it forms part of the rear standoff - yet another nice attention to detail.