G.Skill Triple-Channel 1600 MHz 6 GB Kit Review 3

G.Skill Triple-Channel 1600 MHz 6 GB Kit Review

(3 Comments) »

Introduction

I would like to thank G.Skill for providing the review sample.

About G.Skill
Most of you probally know G.Skill and their memory. The company is one of the few still focusing on memory product in form of RAM or SSD instead of diversifying into numerous directions. G.Skill was founded in 1989 and their mission statement sums their intend up quite nicely:
We are here to provide superior memory products and satisfactory services in order to keep pace with our customers' growing needs, and help our customers in adding value to their products. And we pledge we will continue to do so and enable both sides to obtain significant competitive advantages in the market segments.
G.Skill was kind enough to send us one of their Triple Channel DDR3 Kits intended for the new Intel Core i7 in combination with the X58 plattform. It is available in a 3x1GB (F3-12800CL9T-3GBNQ) or 3x2GB (F3-12800CL9T-6GBNQ) configuration. The company offers a complete range of memory with speeds of up to 2000 MHz.

Specifications:
  • Speed: DDR3-1600 (PC3 12800)
  • CAS Latency: 9-9-9-24
  • Capacity: 3GB (1GB x 3) / 6GB (2GB x 3)
  • Voltage: 1.5~1.6 Volts
  • PCB: 6 Layers
  • Registered/Unbuffered: Unbuffered
  • Error Checking: Non-ECC
  • Type: 240-pin DIMM
  • Warranty: Lifetime

Packaging


G.Skill ships their memory in a fairly boring plastic blister pack with a cardboard backdrop. The rear has a sticker of the actual model of the kit, while you can see the memory clearly when viewing it from the front. I would like to see G.Skill market their memory in nicer looking packages.

A Closer Look


When reviewing dual channel kits, I tend to cross them on the first image on this page. But what to do with tri-channel kits? The result can be viewed above. The G.Skill modules have been covered with thin heatspreaders, which are held in place by quite strong, double sided athesive. I would not recommend pulling these off, as you may damage your modules in the process.


Both sides look identical with the G.Skill logo on the left and a "wave" on the bottom across the entire heatspreader. On side also holds a sticker with all the usual information.


The markings on the edge of the PCB give away the original manufacturer of the circuit boards used. B63URCB 0.70 means that BrainPower is behind these.


The G.Skill logo is part of the heatspreader and has not been glued on. This is certainly a nice little touch. The memory sticker clearly states the actual model number, the speed and total density of the kit, its intended CL rating and the required voltage to run the modules at the rated settings. Another nice information on the side: the serial numbers of the kit we received for review end with 100, 101 and 102.


The red G.Skill modules are a perfect match for the Foxconn BloodRage X58 board. Let's see if it can do more than just look good!
Our Patreon Silver Supporters can read articles in single-page format.
Nov 18th, 2026 17:09 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts