G-Wolves HTX Mini 8K Review 3

G-Wolves HTX Mini 8K Review

(3 Comments) »

Value and Conclusion

  • The G-Wolves HTX Mini 8K is available for $159.00.
  • True 8000 Hz wireless polling
  • Very low click latency
  • Excellent sensor performance
  • High button quality
  • Very good scroll wheel
  • Good choice of components
  • Lightweight
  • Nicely gliding mouse feet
  • Full software customizability
  • Sets of replacement feet included
  • Very pricey
  • After lift-off, the next click will have significant latency added to it (fixed on firmware 1.00.37)
  • Included cables are either too short or too stiff
  • Web driver not available as standalone app
Following the HTX 4K, the HTX Mini 8K goes beyond being just a smaller HTX. In terms of shape, the differences are subtle, but present nonetheless. While most of the geometry is retained, the HTX Mini 8K slopes down more aggressively towards the front, and the scroll wheel, along with the surrounding area, also sits considerably lower on the HTX Mini 8K. In addition, the sensor sits slightly more forward on the HTX Mini 8K, whereas on the HTX 4K, it was exactly in line with the thumb. Even though the open-bottom, solid-shell design approach is kept on the HTX Mini 8K, the surface is not smooth but rather adorned with hexagonal holes. The purpose of this design isn't entirely clear, however, as it does little aside from creating recesses that quickly catch dirt. In terms of structural rigidity, the HTX Mini 8K once again is nearly flawless. On my sample, there is no rattle when shaking, no creaking when applying lateral pressure, and actuating the side buttons by pressing below them is impossible. That said, the shell does flex slightly on the right side when applying a good amount of pressure, though this only becomes noticeable when actively forcing it. Once again, the key to this level of rigidity is that the PCB has been extended such that it supports the parts whose shell thickness would otherwise be insufficient. This way, G-Wolves managed to bring the weight down to just 28 g, which is a whopping 15 g less than what the HTX 4K weighed with a 180 mAh battery, whereas the HTX Mini 8K carries a 250 mAh one. Moreover, the HTX Mini 8K weighs exactly the same as the Hati-R 8K, which is a decent bit smaller. While competitors such as the Finalmouse UltralightX ("Lion," medium) at 38 g or Arbiter Studio AKITSU at 39 g are larger than the HTX Mini 8K, it is clear that the HTX Mini 8K operates on a wholly different level as far as weight goes.

Due to the low button height of the HTX Mini 8K, there are certain limitations in terms of which components can be used. For the main buttons, G-Wolves therefore opted for surface-mounted Omron D2LS-21 (20 M) switches, which fare quite well, surprisingly enough. Pre-travel is moderate to low, and post-travel is low, resulting in a firm and snappy button response. Lateral button movement is also kept low. A set of Omron D2LS-21 switches sees use for the side buttons as well, although these are a lower-rated variant. The forward button shines with very low pre- and post-travel, whereas the back button has moderate post-travel, and actuation isn't entirely even. The scroll wheel encoder too differs from other G-Wolves mice, as a 5.5 mm brown encoder from TTC is used. This one is quite noisy when scrolling, but has excellent tactility, with highly distinct steps allowing for precise scrolling. Much like on previous G-Wolves releases, the bottom lacks indents for feet, allowing one to apply feet of non-default sizes and shapes. Aside from the dot feet installed by default, two sets of larger feet are included with the mouse, along with three sets of dots. They're all made of pure PTFE, and glide very well.

Much like earlier G-Wolves releases such as the Hati-S2 8K, the HTX Mini 8K utilizes PixArt's PAW3395 sensor along with a Nordic nRF52840 MCU. CPI deviation on the HTX Mini 8K is in line with the Hati-S2 8K and sits at +3.8%, which isn't ideal but is easily corrected. General tracking shows no issues, irrespective of whether MotionSync is enabled or not. In terms of polling, all is well, as not a single poll is missed even at 8000 Hz, and all other rates are perfectly stable, too. Motion delay will differ depending on the firmware used. Firmware version 01.00.36 and later have been specifically optimized for battery life, which is why motion delay is slightly higher than on the older 00.00.17 firmware, as instead of the 1.0 ms lead the Hati-R 8K had on that firmware over the Logitech G403 (control subject) at 4000 Hz in wireless operation, the HTX Mini 8K on the more recent firmware is only ahead by 0.7 ms. Much like before, 8000 Hz posts worse numbers presumably due to a larger buffer for retries being used. Notably, the firmware versions behave differently in terms of motion delay over time, as on the older firmware, the Hati-R 8K was ahead of the G403 consistently throughout the entire motion, whereas on the newer firmware, the HTX Mini 8K is initially behind the G403, and only gets ahead after first the first few milliseconds of the motion. In practice, these differences are miniscule of course, and for those who value raw performance above all, using the 00.00.17 firmware version is always an option. For everyone else, the improved battery life afforded by the newer firmware will likely be appreciated, however.

In terms of click latency, differences exist between the 00.00.17 and 01.00.36 firmware versions on the one side and the 01.00.37 firmware version on the other. With the former, the HTX Mini 8K will average no more than 0.3 ms in wireless operation regardless of polling rate setting, provided debounce time is set to 0 ms. Setting debounce time to the lowest value has no immediate downsides as long as there is no double-clicking, as a slam-click prevention algorithm is present, adding additional debounce whenever the mouse has been lifted, such that no accidental button actuation occurs when resetting the mouse. However, this algorithm is flawed on the former group of firmware, in that the first click after lift-off will have the full ~16 ms added applied, even when the mouse has already been landed again. Firmware version 01.00.37 fixes that, but also increases click latency to 0.5 ms in the process. This is likely unintentional, but even if it weren't, marginally higher average latency is always better than inconsistency in my book, as is the case with some clicks having upwards of 16 ms of latency, just because the mouse has been lifted right before. Once again, the choice is ultimately given to the user here.

G-Wolves cites up to 80 hours of battery life at 1000 Hz, but even though the web driver includes a percentage-based (increments of 5%) battery life indicator, it proved unhelpful during the review, as it didn't budge one bit. Still, given the battery capacity of 250 mAh, it is reasonable to assume that the HTX Mini 8K sits indeed somewhere in the 70–80 hours range at 1000 Hz, and accordingly less at higher polling rates. Charging isn't all that speedy on the HTX Mini 8K, but decent enough, though playing while charging won't be an option with the included cables anyway. The first one isn't all that flexible to begin with, but more importantly seriously short at 1.25 m, whereas the second one is a bit longer at 1.45 m yet even stiffer. As such, it is best to keep the HTX Mini 8K charged at all times to minimize forced downtime.

As with other recent G-Wolves releases, configuration on the HTX Mini 8K is done through a web driver. Due to using WebHID, this web driver will only work in Chromium-based browsers such as Chromium or Edge. Hence, for those not already using these browsers, being directed towards a web driver requires installing an additional browser, which of course comes with its own resource footprint, much like a regular peripheral software would. In addition, if G-Wolves were to go defunct, or decide to no longer host the web driver, configuration would become impossible, as a local copy unfortunately won't work. This is doubly problematic in that the HTX Mini 8K doesn't even have a CPI button, so even something basic as changing CPI requires a configuration driver. As such, I consider the web driver a step back compared to the previous standalone application featured on earlier G-Wolves mice, and would welcome if G-Wolves would also release a desktop version of their web driver in the future. As for the driver itself, I couldn't find any bugs, and all the relevant options are present. The only minor issue is that setting changes can still be made after the mouse has entered sleep mode, yet won't be applied, which isn't communicated through the UI. An additional oddity is that any adjustment to the debounce settings will only take effect after the mouse has been lifted and reset once.

At $159.00, the HTX Mini 8K definitely doesn't run the risk of being perceived as a bargain. At the same time, the gaming mouse market isn't exactly filled with full-size, open-bottom wireless mice weighing 28 g, which is why the HTX Mini 8K stands out. Frankly, the HTX Mini 8K only has competition if we disregard weight completely, which is saying something. Even when looking past the weight, the HTX Mini 8K remains a very good release, as performance, buttons, and build quality all are on a high level. Hence, for those who simply want the lowest weight possible, and can deal with the price and possibly questionable after-sales support, the HTX Mini 8K is a top contender, and earns our Recommended award, along with our venerable But Expensive badge.
Recommended
But Expensive
Discuss(3 Comments)
View as single page
Nov 21st, 2026 07:42 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts