Established in 2018, G-Wolves is a peripherals company based in China. The ambidextrous VUK introduces several novelties. Most notable is the addition of a secondary sensor. Aside from the usual sensor located roughly in the geometric median, the VUK has another one positioned right at the front, and allows freely switching between either one. Compared to designs incorporating a movable sensor such as the one from Pwnage, which only enables one to move the median-position sensor slightly more to the front or back, the secondary sensor at the front on the VUK is in a place rarely used for the sensor at all. As part of this design, and similarly to the CHERRY XTRFY M68 Pro, the VUK also has an uncommonly low-sitting front, which in turn necessitated moving the USB connector to the right side. Despite this novel design, the VUK weighs only 36 g while having a solid upper shell. For both sensors, PixArt's PAW3950 capable of 30,000 CPI sees use. The main buttons have been outfitted with switches custom-made by Huano for G-Wolves, rated for 80 million clicks and featuring an orange transparent shell as well as an orange plunger. These are so-called SPDT (single-pole, double-throw) switches, which feature a top contact in addition to the usual bottom contact. By utilizing the NC pin, physical click latency is reduced by a significant amount, as a click can already be registered upon the top contact being opened instead of having to wait for the bottom contact to close. Much like on previous G-Wolves releases, polling rates of up to 8000 Hz are supported in wireless operation, and the feet are made of pure PTFE, with several replacement sets included in the box. Configuration is done conveniently through a web driver. The VUK is available in black, white, and Frost Blue.
Specifications
G-Wolves VUK
Size:
124.8 mm × 64.6 mm × 38.1 mm
Size (inches):
4.91" × 2.54" × 1.5"
Ambidextrous:
Partially (side buttons on left side only)
Weight:
36 g
Number of Buttons:
5 (including wheel click)
Main Switches:
Huano (orange transparent shell and plunger) (80 M)
Aside from the mouse, one finds a braided USB Type-A to Type-C charging cable, braided USB Type-A to Type-C extension cable, wireless dongle, carrying case (including strap), set of grip tape, five sets of replacement feet (four fitted sets and one set of dots), two stickers for the bottom, and a quick start guide in the box.
Weight
My scale shows around 36 g (±1 g), which is marginally more than the weight cited by G-Wolves. For comparison, the similarly sized and fully solid-shell CHERRY XTRFY M68 Pro, which does not feature two sensors, weighs 55 g. An excellent weight. Due to the additional sensor at the front, the VUK ends up being rather front-heavy.