Packaging
The Card
Galax's card impresses with a white color theme. The main cooler shroud is plastic, the backplate is metal and has a large cutout for air to flow through.
Dimensions of the card are 30.0 x 12.5 cm, and it weighs 1300 g.
Installation requires three slots in your system. We measured the card's width to be 50 mm.
Display connectivity includes three standard DisplayPort 2.1b and one HDMI 2.1b.
All GeForce RTX 50-series Blackwell cards feature a new display engine supporting DisplayPort 2.1b with UHBR20, as well as HDMI 2.1a. Both interfaces support DSC (display stream compression). With DSC enabled, a single DisplayPort on this card can drive 4K 12-bit HDR at 480 Hz; or 8K 12-bit HDR at up to 165 Hz. The RTX 5070 Ti features an updated media acceleration engine with support for 4:2:2 video formats, AV1 UHQ, and MV-HEVC. There are two independent NVENC and NVDEC units.
The card uses a single 16-pin connector, which allows a maximum power draw of 600 W, but the board power limit is set much lower of course.
Galax has installed an RGB lighting zone behind the fans and near the corner of the card.
Note the connector to the left of the 16-pin power connector. It is used to synchronize other components in your system with the lighting of the Galax RTX 5070 Ti.
Teardown
The Galax thermal solution uses seven heatpipes and provides cooling for the memory chips and VRM circuitry, too.
The backplate protects the card against damage during installation and handling.