Gigabyte B850I Aorus Pro Review 17

Gigabyte B850I Aorus Pro Review

BIOS Overview »

VRM Overview


The VRMs lack any active cooling and the heatsink isn't the largest we've seen on a Mini-ITX board either, so the board has a tough task of dealing with our Ryzen 9 9950X in an extended stress test. The peak of just under 84°C isn't great, but you'll be looking at around five to ten minutes of full load here depending on your own cooling before it tops a peak of 70°C, and even after 30 minutes there wasn't any throttling. Still, if you're planning on using the board with a 170 W TDP CPU flat out for extended periods, you'll need to make sure the VRMs receive sufficient airflow, and any tweaking that results in more heat probably isn't the best idea.


The 11 power phases have a single heatsink and this is perhaps hindered a little by the large plastic shroud that prevents airflow through the underside of the heatsink end to end. The situation is compounded by the addition of a stuck-on aesthetic fascia on top of the heatsink in much the same way as the one on the M.2 heatsink.


We have Infineon PMC41410 80 A phases for the eight vCore and two SOC phases, which we've seen before being used with the Gigabyte X870E Aorus Pro, while a single MaxLinear MXL7630S 30 A stage is used for MISC.


An Infineon XDPE192C3B 12-phase PWM controller is present, which we also saw on the Gigabyte X870E Aorus Pro and previously on high-end boards such as the MSI MEG X670E Ace.
Next Page »BIOS Overview
View as single page
Nov 19th, 2026 16:34 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts