Overclocking
Gigabyte's Tweaker section has all the usual options and of course Gigabyte's X3D Turbo Mode 2.0. As we saw in our Gigabyte X870E Aorus Pro X3D Ice review, this has a few options to boost performance in specific scenarios, which include disabling the CCD without 3D V-Cache on dual CCD CPUs, excluding the 9950X3D2 of course, which has both dies equipped with the 3D V-Cache. Other tweaks involve disabling Simultaneous Multithreading and boosting frequencies at the expense of power and thermals. In short, a lot will depend on the CPU you have, but performance boosts here are often small, and beware of disabling SMT and dies as this will mean significantly lower multithreaded performance of course.
The EFI is a little simplistic from a manual overclocking/PBO perspective, with a few more options available on competing boards for example, you still have the usual options such as Curve Optimizer and Curve Shaper under PBO controls and Eco Mode with, sub menus for loadline calibration and memory sub timings and generally much less back and forth through menus than you might find in an ASRock EFI for example. Still, ASUS and MSI have a few more options here and there that allow for quicker tweaking or more granularity to it.