Gigabyte X870E Aorus Master X3D Ice Review 14

Gigabyte X870E Aorus Master X3D Ice Review

BIOS Overview »

VRM Overview


The 18+2+2 power phase design ran a little warmer than the cheaper X870E Aorus Pro X3D Ice, where the average temperature was close to 60°C after our 30-minute stress test, while here it was over 65°C, most likely due to the entire top of the main heatsink being covered by the RGB display. Still, this isn't likely to make any difference to performance or overclocking.


The backplate cools the rear of the VRMs as well as the Realtek 10 Gbps controller and chipset area. The VRM heatsink itself is a single-piece linked with a direct touch heatpipe and also cools the USB4 controller and topside of the 10 Gbps Ethernet controller.


The top of the heatsink features the RGB lighting display, which as we previously mentioned will likely hurt cooling a bit, but the heatsink is still very capable and features a huge surface area thanks to Gigabyte VRM Thermal Armor, which features its familiar dense fin array. With local cooling from an air cooler or AIO liquid cooler pump equipped with a fan, this heatsink will likely see far lower temperatures than our worst case scenario here.


The 18 vCore phases and two for SoC are SPS 110 A Infineon PMC41430 stages with two DrMOS OnSemi NCP 302155R 60 A stages for MISC.


For PWM controllers we have an Infineon XDPE192C3D digital dual loop 12 phase controller and Richtek RT3672EE, rounding off what is essentially an identical power delivery to the X870E Aorus Pro X3D Ice.
Next Page »BIOS Overview
View as single page
Nov 20th, 2026 14:25 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts