For anyone wondering about rear connector motherboard compatibility, only ATX models are compatible, and you'll also need to convert the panel next to the motherboard tray. HAVN has focused here on supporting standard motherboards, and you'll lose the SimpliCable routing components as well as having to swap the panels around. There are benefits to this as we'll see later. The VGPU version of the case comes equipped with a pre-installed PCIe Gen 5 riser cable, along with an adjustable vertical GPU mount. The enhanced structural rigidity HAVN claims over the HS 420 VGPU does come at a price, as the case lacks the removable roof section that many of its competitors enjoy, although we do get the removable fan mount. The lower fan mount is angled and supports three 120 mm fans, but there's not enough clearance here for a radiator as well.
The rear panel is just as busy as the main chamber, with a removable side fan mount that's bristling with more anti-vibration O-rings. This can house three 120 mm fans or a 360 mm radiator, or two of the three single 3.5" storage locations, or up to four 2.5" mounts. There are numerous Velcro cable anchors too, although some are a little short. Thankfully, longer ones are included in the box. The SimpliCable routing system uses rubber vents to guide cables with securing clips at either end. It works best with neat pre-braided cables, especially if they have cable guides already fitted.
Another example of the obsession with anti-vibration is the side fan mount, which slots into rubber grooves at one end with yet more rubber grommets at the top and side. The storage mounts comprise three parts with a white cover and two black sections, with one housing two 2.5" storage devices and the other a single 3.5" hard disk.
Beneath the motherboard is a small protruding platform that supports the vertical GPU mount and is equipped with more SimpliCable grommets, although getting chunky GPU power cables through can be a little fiddly due to its location. Aside from VGPU-specific components, the case is essentially the same as the standard version and can be converted to standard GPU layout. Due to the GPU sitting much lower than the primary PCIe slot and the lack of any horizontal slots, you'll also lose the ability to use other expansion cards. GPU depth isn't an issue while length clearance stands at 430 mm.
As well as having four-slot GPU support, the entire bracket can slide in and out, providing more clearance from the side panel. This is done by loosening thumbscrews.
The lower fan mounts are removable as one single piece that screws into place, which makes installing fans much easier. Screws are included for this purpose, and again this is another component with anti-vibration rubber O-rings. The rear fan mounts feature a solid interior vent, with the removable part on the outside. The area also provides 170 mm of CPU cooler clearance. With the roof fan mount detached it's easier to see the three rubber grommets used to reduce vibration, plus, as usual, fans and radiators become far easier to install.
The PSU mount offers 230 mm of clearance and sits vertically with a single rubber pad on the underside of the mount. Above this is an eight-channel fan hub. The rear removable fan mount does seem slightly overcomplicated, but does allow for the use of more rubber O-rings as well as neater cable routing.
The glass airflow dividers act to direct airflow into a vertically mounted GPU and also prevent it from recirculating. This will depend on the size and cooling arrangement of your particular GPU as to how effective they will be. The lower larger glass panel is fixed while the top panel uses a strong magnet to secure to the rear of the case, and is slightly adjustable to be able to line up with your GPU.
There are the usual USB 3.0, USB Type-C, audio, and front panel header cables, and we also have a SATA power connector and 4-pin fan cable to power the included fan hub, with the 4-pin cable being used to control all eight fans from a motherboard header.