HyperX Fury DDR4-3600 MHz CL18 2x16 GB Review 6

HyperX Fury DDR4-3600 MHz CL18 2x16 GB Review

(6 Comments) »

Introduction

HyperX Logo

With memory prices falling, now is a great time to be looking for memory upgrades. Fall hardware releases are in full swing, there is competition from both Intel and AMD, and the Red brand has thoroughly fixed the memory issues of generations past. No longer do users have to worry about memory compatibility or shopping for expensive AMD-branded kits. With 3200 MHz natively supported on the new Ryzen platform, options for enthusiasts have never been more open.

Kingston is a familiar name when it comes to memory and flash storage. The company's gaming brand "HyperX" has also carved a name for itself with highly successful peripherals, from headsets to mice and, of course, high performance memory kits. The HyperX Fury is designed to be a cost-effective kit, available in 2400–3733 MHz speeds, CL15–19 latencies, single module capacities of 4–32 GB, and kit capacities of 16–128 GB.

The HyperX Fury kit I have for testing today features 2x 16 GB sticks at a Ryzen optimized 3600 MHz speed and 18-22-22-39 timings. Let's find out how the HyperX Fury stacks up in this highly competitive market segment!



Specifications

Specifications
Manufacturer:Kingston
Model:HX436C18FB4K2/32
Speed Rating:DDR4-3600
Rated Timings:18-22-22-39
Tested Capacity:32 GB (2x 16 GB)
Tested Voltage:1.35 V
PCB Type:8 layers
Registered/Unbuffered:Unbuffered
Error Checking:Non-ECC
Form Factor:288-pin DIMM
Warranty:Limited Lifetime

Packaging


The HyperX Fury packaging is a classic clamshell with a red sticker across the middle. "HyperX" along with the specifications for the kit are featured on the front.

A Closer Look


The sticks cut a low rectangular profile that should be great for cooler clearance.


The HyperX Fury sticks use a black aluminium heat spreader with stamped accents.


"HyperX" is featured along the top of each stick, along with "Fury" on one side. The specifications on the HyperX Fury are a nice balance for Ryzen or Intel systems, featuring a 3600 MHz XMP profile at 18-22-22-39 and 1.35 V.


"HyperX" has been printed across the top-right side of the gray aluminium insert, with the Kingston logo on the heat spreader just below it.


The HyperX Fury sticks are single-sided despite the 16 GB per stick specification, and use Micron E-die 2 GB ICs on a PCB with 8 layers for added stability.


I like to weigh a stick from each kit I get as the difference in mass can be pretty drastic between kits. Mass is not the best indicator of cooling efficiency because material can matter, and of course, heat dissipation is reliant on surface area, not volume or mass. That said, it is still interesting to compare.

The HyperX Fury comes in at 34.00 g on my scale, which is on the high end. The aluminium heat spreader is thicker than most, and the gray aluminium insert adds a fair bit of mass. For height, the HyperX Fury comes in at almost 35.51 mm with my calipers, which is well below the average of 45–50 mm. This kit will be great for systems where cooler clearance is a concern.
Our Patreon Silver Supporters can read articles in single-page format.
Nov 20th, 2026 13:29 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts