A quick look at the Kingston Fury Renegade after removing it from the packaging, it carries forwards the heatsink design of the DDR4 series that came before it. This is a new design currently available with two-tone heatspreaders, featuring either a white or black base with brushed aluminium on top.
On one side each DIMM has the Kingston Fury branding.
The identification sticker on each DIMM module is rather basic, displaying just the SKU without much additional information. While many brands typically include details like the XMP operating frequency and the corresponding voltage, Kingston falls short in this regard. The sticker lacks an easy-to-read format and doesn't provide much useful information for the consumer. If you've misplaced the box, you'll need to visit the Kingston website to gather more details.
Laying the DIMMs on the side, you can see the plastic strip sandwiched in between the heat spreaders. This plastic strip in the middle will be illuminated when the system is powered on. The RGB lighting effects can be customized and controlled using popular motherboard software, including Kingston's own software or ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome Sync.
The Kingston Fury Renegade CUDIMM DDR5-8400 48 GB kit Z-Height is 44.5 mm measuring with calipers. Each DIMM weighs in at a staggering 53 grams on the scale.
After taking the heat spreader off, we see that these are single-sided DIMMs with eight (24 Gbit) 3 GB ICs. This is as expected for a DDR5 24 GB kit, since densities increased with DDR5. The thermal pad covers all the memory ICs and instead of using a single thin strip often used on many of these heat spreaders, Kingston has opted for special W/mK thermal pads split in two sections. This particular kit does have direct contact cooling coverage for the PMIC, CLK driver and the surrounding components.
A closer look at the ICs shows that these are SK Hynix (H5CGD8MGBD-X021). Which can be abbreviated to SK Hynix 3 GB M-Die, not to be confused with SK Hynix's first DDR5 M-Die (2 GB) in 2021. Up until the release of (24 Gbit) 3 GB ICs, the previous world record crown was held by SK Hynix A-Die (16 Gbit) 2 GB, which is still considered a good choice for high frequency overclocks paired with lower primary timings, only to be outdone by the SK Hynix 3 GB variant for highest frequency, that we have here.
The Client Clock Driver (CKD) part number is "DR5CKD1GC0," with the manufacturer being RAMBUS.
With DDR5, one of the major changes is how the motherboard directly provides 5 V to the memory module's PMIC, which is then stepped down and split accordingly. No longer is the motherboard responsible for regulating the voltages, as with DDR4. The PMIC has the part number "OP=AL HG2," software reports this as Richtek being the manufacturer.