Introduction
With revenue in the multi-billion dollars range, Kingston is the largest DRAM and flash memory products vendor in the world. While their strongest suit is memory modules and USB/flash card storage, they are also a major player in the SSD market, having released famous products such as the KC3000 and NV2/NV3.
The Kingston Fury Renegade G5 is a high-performance PCIe 5.0 SSD aimed at users requiring fast storage. It finally brings Kingston's offerings to the Gen 5 world. The drive uses the Silicon Motion SM2508 controller, designed for efficiency and reduced thermal output, which helps with cooling requirements. We've seen the controller before on the Acer Predator GM9000, and several other drives using the SM2508 have been announced recently.
Unlike the GM9000 and some other competing models, the Fury Renegade G5 is built with Kioxia 218-layer BiCS8 TLC NAND flash instead of Micron's B58R. This difference in NAND sourcing may lead to variations in performance or endurance characteristics, which makes this review interesting. Kingston also includes a DRAM cache of 2 GB of LPDDR4 memory, used to manage the SSD's internal data structures.
The Kingston Fury Renegade G5 is available in capacities of 1 TB ($200), 2 TB ($325) and 4 TB ($590). The endurance is set to 1000 TBW, 2000 TBW and 4000 TBW respectively. Kingston includes a five-year warranty with the G5 SSD.
| Specifications: Kingston Fury Renegade G5 2 TB SSD |
|---|
| Brand: | Kingston |
|---|
| Model: | SFYR2S/2T0 |
|---|
| Capacity: | 2048 GB (1907 GB usable) No additional overprovisioning |
|---|
| Controller: | Silicon Motion SM2508 |
|---|
| Flash: | Kioxia 218-layer 3D TLC / BiCS8 Kingston FP01T08UCT1-65-001T |
|---|
| DRAM: | 2 GB Micron LPDDR4-4266 D8CSC / MT53E512M32D1ZW-046-WT-B |
|---|
| Endurance: | 2000 TBW |
|---|
| Form Factor: | M.2 2280 |
|---|
| Interface: | PCIe Gen 5 x4, NVMe 2.0 |
|---|
| Device ID: | KINGSTON SFYR2S2T0 |
|---|
| Firmware: | SGW00110 |
|---|
| Warranty: | Five years |
|---|
Price at Time of Review: | $325 / $159 per TB |
|---|
Packaging
The Drive
The drive is designed for the M.2 2280 form factor, which makes it 22 mm wide and 80 mm long.
PCI-Express 5.0 x4 is used as the host interface to the rest of the system, which doubles the theoretical bandwidth compared to PCIe 4.0 x4.
On the PCB you'll find the controller and two flash chips, a DRAM cache chip is included, too.
Kingston's sticker uses a metallic surface, which can help spread a little bit of heat to aid dissipation. It is very thin, thinner than what we usually see, so the heat transfer is limited.
Chip Component Analysis
The Silicon Motion Technology SM2508 controller is the company's first PCI-Express 5.0 controller for consumer applications. It supports PCIe 5.0 x4 and runs with eight flash channels at 3600 MT/s. SMI fabricates the controller using a 6 nanometer process at TSMC Taiwan.
The two flash chips are Kioxia BiCS8 218-layer 3D TLC NAND. Each chip has a capacity of 1 TB.
The Micron DRAM cache chip has a capacity of 2 GB and runs at LPDDR4-4266.
Test Setup
Synthetic Testing
- Tests are run with a 20-second-long warm-up time (result recording starts at second 21).
- Between each test, the drive is left idle for 60 seconds, to allow it to flush and reorganize its internal data.
- All write requests contain random, incompressible data.
- Disk cache is flushed between all tests.
- During these tests, M.2 drives are tested with additional active fan-cooling, to ensure thermal throttling can't happen
Real-life Testing
- After initial configuration and installation, a disk image is created; it is used to test every drive.
- Automated updates are disabled for the OS and all programs. This ensures that—for every review—each drive uses the same settings, without interference from previous testing.
- Our disk image consumes around 700 GB—partitions are resized to fill all available space on the drive.
- All drives are filled with random data to 85% of their capacity. This is intentional, to run the drive in realistic operating conditions—nobody uses a nearly-empty SSD in their system. It also puts additional stress on the pseudo-SLC cache subsystem, because there is less free NAND space to work with.
- Partitions are aligned properly.
- Disk cache is flushed between all tests.
- In order to minimize random variation, each real-life performance test is run several times, with reboots between tests to minimize the impact of disk cache.
- All application benchmarks run the actual application and do not replay any disk traces.
- Our real-life testing data includes performance numbers for a typical high-performance HDD, using results from a Western Digital WD Black 1 TB 7200 RPM 3.5" SATA. HDDs are significantly slower than SSDs, which is why we're not putting the result in the chart, as that would break the scaling, making the SSDs indistinguishable in comparison. Instead, we've added the HDD performance numbers in the title of each test entry.
- During these tests, M.2 drives are tested with additional active fan-cooling, to ensure thermal throttling can't happen