Kingston IronKey Vault Privacy 80 External SSD 1 TB Review 5

Kingston IronKey Vault Privacy 80 External SSD 1 TB Review

(5 Comments) »

Introduction

Kingston Logo

With revenue in the multi-billion dollars, Kingston is the largest DRAM and flash memory product vendor in the world. While their strongest suit is in memory modules and USB/flash card storage, they are also a major player in the SSD market, which, besides internal storage, includes portable SSDs, too.



Today we are taking a look at the Kingston IronKey Vault Privacy 80 External SSD in the 1 TB variant. Kingston's newest external drive offers a very specialized capability. All data is encrypted at all times and you can only unlock it by entering the correct passcode on the SSD's integrated touch-screen. This makes the drive a great choice for systems where you can't be 100% sure if they are compromised, i.e. a keylogger is installed that would snatch up your password while typing. Before unlocking, the VP80ES will ask if you want to connect in read-only mode, so you can read data, but it can't be written to.

Internally, the IKVP80 uses an ARM microcontroller running custom software that encrypts all data that passes through it using FIPS 197 certified XTS-AES 256-bit encryption. Most of you have probably heard of AES encryption, with the "256" number denoting the key length, i.e. how secure it is. "XTS" is a special encryption mode that was invented for block-based storage devices (like SSDs and HDDs).

Kingston specifies up to 250 MB/s for the transfer rates of the IronKey 80, which isn't a lot. It seems the bottleneck is the encryption engine, not the underlying storage, more on that later in our testing. The connection to the host machine is made over a USB-C USB 3.2 Gen 1 connection, a USB 3.2 Gen 1 C-to-A adapter cable is included in the box.

Due to its hardware-only design, the IronKey Vault Privacy 80 is compatible not only with Windows, but with all operating systems that support USB mass storage, which includes macOS, Linux, Chrome OS, Raspberry Pi.

Kingston offers the IronKey Vault Privacy 80 in capacities of 480 GB ($285), 960 GB ($350) and 1920 GB ($500), all these models come with a three-year warranty.

Package



The Drive


The Kingston IronKey Vault Privacy 80 uses a metal case that has a great-looking blue surface with matte finish—definitely ready for the board room. The most prominent feature is certainly the large touch-screen, which is used to configure the device and enter the passcodes.

I've put an M.2 NVMe drive next to it, to give you a better feeling for the physical dimensions of the drive.


On one side you'll find the USB-C port to connect the storage unit to your system. The black part is plastic, but that shouldn't be a problem for durability.


When the unit powers up it performs some kind of self-test for a few seconds, and after that the boot loader takes over. Total boot time is around 15 seconds, so not "long", but definitely not "instantaneous".


After startup the password screen shows up, and you have to provide the password that you selected during initial setup.


Once the correct password has been entered, you get a choice of "Connect" (read/write mode) or you can connect in "read-only" mode. The globe icon lets you change the language and the cogwheel is for settings.


When connected, you get the option to disconnect it through the touch-screen, or of course you could disconnect it from within your OS, too, which is always a good idea, to ensure all caches have been flushed.


Wrong password? You've got a limited number of attempts (note the "14/15" counter).


After several failed attempts you have to power cycle the enclosure, which helps against automated bruteforce attempts, using a robot arm for example.


Too many failed password attempts? All data on the enclosure's storage will be deleted and the enclosure will reset itself to factory settings, so you can reconfigure it, set a new password, etc.


The various settings screens have tons of options, most are self-explanatory. Here's the more interesting ones explained:
  • "Password rules" lets you choose whether your passwords must contain at least one number and/or at least one letter.
  • "Password length" can be selected from between 6 (default) and 64.
  • An interesting one is "randomize key layout", so people can't just look where your finger's smudges are on the touch screen and try to guess the password.
  • "Auto-lock time" lets you choose a duration after which the drive will automatically lock itself, requiring a password again. For those cases where you've forgotten to lock the device manually
Great ideas overall, very nice!


You have support for all the major western languages on the IronKey Vault Privacy 80.

Our Patreon Silver Supporters can read articles in single-page format.
Nov 21st, 2026 11:12 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts