Test Setup

Synthetic Testing

• Tests are run with a 20-second-long warm-up time (result recording starts at second 21).
• Between each test, the drive is left idle for 60 seconds, to allow it to flush and reorganize its internal data.
• All write requests contain random, incompressible data.
• Disk cache is flushed between all tests.
• During these tests, M.2 drives are tested with additional active fan-cooling, to ensure thermal throttling can't happen.

Real-life Testing

• After initial configuration and installation, a disk image is created; it is used to test every drive.
• Automated updates are disabled for the OS and all programs. This ensures that—for every review—each drive uses the same settings, without interference from previous testing.
• Our disk image consumes around 1.5 TB—partitions are resized to fill all available space on the drive.
• All drives are filled with random data to 80% of their capacity. This is intentional, to run the drive in realistic operating conditions—nobody uses a nearly-empty SSD in their system. It also puts additional stress on the pseudo-SLC cache subsystem, because there is less free NAND space to work with.
• 1 TB drives are tested in three independent runs, applications first, then 2x games, each filled to 80% capacity, with secure erase between.
• Partitions are aligned properly.
• Disk cache is flushed between all tests.
• In order to minimize random variation, each real-life performance test is run several times, with reboots between tests to minimize the impact of disk cache.
• All application benchmarks run the actual application and do not replay any disk traces.
• During these tests, M.2 drives are running with additional active fan cooling, to entirely prevent thermal throttling.

Comparison Drives

We compare the tested drive to a wide selection of SSDs currently available on the market. Besides popular drives, our focus is also on including common controller and flash type combinations.