KLEVV CRAS V RGB DDR5-6400 CL32 2x 16 GB Review 7

KLEVV CRAS V RGB DDR5-6400 CL32 2x 16 GB Review

(7 Comments) »

Value and Conclusion

  • The 32 GB (2x 16 GB) KLEVV CRAS V RGB DDR5-6400 CL32 kit is available for around $120.
  • Single-Rank DIMMs for higher compatibility
  • Good for Intel 12th/13th Generation K series CPUs
  • Compatible with Intel Z690 / B670 / Z790 motherboards
  • Limited lifetime warranty
  • Thermal pad on PMIC
  • Decent overclocking abilities*
  • Not optimal for AMD Ryzen 7000 CPUs**
  • Only one memory profile (XMP)
  • Brand Silkscreen on ICs
  • Low North America availability
* User results may vary
** In 2:1 Ratio Configuration


Now that we have benchmarked this memory in its stock configuration and performed some overclocking, it is time to put everything into perspective. As we wrap up this review, we will go over which platform this memory kit is best suited for, what KLEVV could improve upon to make a better product, and finish up on a positive note.

To start off, let's talk about compatibility because it is often one of the first asked questions in regard to system memory. We will first cover Intel, as this is quite easy. Using the DDR5-6400 XMP profile, this is not a problem for Z690 and Z790 motherboards paired with either a 12th or 13th Generation (K) processor. There are some B660 and Z690 motherboards that do not make the cut. These are just not that good at running higher speed memory due to being the first commercial product to support DDR5. With so many choices, it is good to always check the vendor's motherboard QVL list for official confirmation or at least the specifications to see if DDR5-6400 is supported.

As for AMD support, it becomes a bit technical and for those who do not care for the details, Ryzen 7000 series processors are going to always get a DDR5-6000 recommendation first instead unless you are someone who likes tinkering with motherboard BIOS settings. The technical explanation is three-fold. Firstly, by default most motherboards (A620, B650, X670) will automatically set this memory into a 2:1 ratio to the memory controller. This introduces a major latency penalty and negatively impacts game performance. Secondly, if you enforce a 1:1 ratio, there is a chance that it simply will not work, as not all Ryzen 7000 CPUs are capable of this. Lastly, the true optimization for Ryzen is to keep the Infinity Fabric (FCLK) in step with the system memory. Therefore, 6400 MT/s would require FCLK of 2133 MHz. Not impossible, but highly unlikely to be bootable or stable without using XOC voltages. Top tier (Golden) CPUs do exist, but it's probability not yours. Therefore, simply put, KLEVV sells a DDR5-6000 kit that would be a much better fit and far less of a hassle to deal with if problems occur.

This brings us to the only major complaint, and that is the lack of a secondary XMP profile. For those concerned about compatibility, alternative brands offer multiple XMP profiles can provide a much-needed reassurance. Often building a computer does not go to plan, it is always something, big issues, small issues, or both. If the primary profile does not work for whatever reason, a fallback profile is a good temporarily solution while waiting for technical support to respond. As mentioned previously, Intel users are fall less likely to run into compatibility issues. While this KLEVV CRAS V memory kit isn't specifically marketed towards AMD users, it is promoted on the website. Having an secondary profile at a lower frequency, but above the JEDEC DDR5-4800 baselines is a strong incentive to pick a brand that includes this.

Next on the list covers memory overclocking. It should be pointed out that unless it marketed as a halo product or is designed with overclocking in mind, the overall results will not impact the product recommendation. It is always worth a mention that overclocking in general voids the warranty as well. Here we have a memory kit that does a decent job for those who are looking to overclock their memory. However, KLEVV has used its own part number on the memory chips. This opens up the possibility that in the future, batches any brand or IC revision can be used as long as it still meets the requirements for this particular DDR5-6400 bin and listed primary timings. Therefore, out of principle I cannot suggest buy this memory kit if overclocking will be pursued. The risk is just too great that it won't be the same for someone else.

At this point in conclusion, it seemly isn't looking well for KLEVV. However, the negativity is minor and only to point out potential issues some users may come across. The KLEVV CRAS V RGB DDR5-6400 is actually a good product and checks off all the appropriate boxes for gamers looking for performance on a budget. Two years ago, this memory speed was considered a PC enthusiast halo product. While retail memory kits are currently topping out at 8200 MT/s, 6400 MT/s is still a decent frequency and not to be passed over because of the lower denomination. Depending on the system configuration, faster doesn't always mean better. Sometimes the hardest part about putting together a new system is a balance between cost and performance. KLEVV offers a number of system memory kits for every type of user. This KLEVV CRAS V RGB DDR5-6400 memory kit offers consumers a median between the extreme and the casual. If it's offered for sale in your region, consider this memory kit for that next Intel system.

Review Update: This CRAS V RGB DDR5-6400 memory kit from KLEVV is currently designed exclusively for the Intel platform. Testing system memory on both platforms is standard practice for TechPowerUp, even if it is not officially supported. KLEVV does not support this CRAS V RGB DDR5-6400 memory kit on AMD platforms at this time. Please visit KLEVV website for more information about AMD supported products.
Discuss(7 Comments)
View as single page
Nov 19th, 2026 02:37 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts