Lexar NM1090 Pro 4 TB Review 25

Lexar NM1090 Pro 4 TB Review

(25 Comments) »

Introduction

Lexar Logo

Lexar has made a name for itself in the portable storage market—they are deservedly well known for SD cards and USB drives, so it's natural for them to expand into other areas of flash storage, like consumer SSDs. Lexar was founded as a subsidiary of Micron, but was sold to Longsys in 2017 and has been operating independently since.



Today's review covers the Lexar NM1090 Pro 4 TB, which is the company's new flagship drive supporting the fast PCI-Express 5.0 standard. The large 4 TB capacity variant offers tons of storage and is a great choice for people who need more than 2 TB from their M.2 SSD. Under the hood, we found the new Silicon Motion SM2508 controller, which we've seen on other recent SSDs. Silicon Motion has been taking notes during Phison's Gen 5 market dominance and engineered a controller that's optimized with power consumption in mind—to reduce the heat output—which lets them run without a noisy active cooling solution. The NAND flash chips are Micron B58R 3D TLC with 232-layers. A DRAM cache chip is included, too, for the mapping tables of the SSD, using 4 GB of LPDDR4-3733.

The Lexar NM1090 Pro is available in capacities of 1 TB ($130), 2 TB ($210) and 4 TB ($390). Endurance for these models is set to 700 TBW, 1400 TBW and 2800 TBW, respectively. Lexar offers a five-year warranty with the NM1090 Pro SSD.

Specifications: Lexar NM1090 Pro 4 TB SSD
Brand:Lexar
Model:LNM109P004T-RNNNU
Capacity:4096 GB (3815 GB usable)
No additional overprovisioning
Controller:Silicon Motion SM2508
Flash:Micron 232-layer 3D TLC / B58R
Longsys H243408315305T
DRAM:4 GB LPDDR4-3733
Foresee FLXC2004G-N1
Endurance:1400 TBW
Form Factor:M.2 2280
Interface:PCIe Gen 5 x4, NVMe 2.0
Device ID:Lexar SSD NM1090 PRO 4TB
Firmware:Y0221A00
Warranty:Five years
Price at Time
of Review:
$390 / $95 per TB

Packaging

Package Front
Package Back


The Drive

SSD Front
SSD Back

The drive is designed for the M.2 2280 form factor, which makes it 22 mm wide and 80 mm long.

SSD Interface Connector

PCI-Express 5.0 x4 is used as the host interface to the rest of the system, which doubles the theoretical bandwidth compared to PCIe 4.0 x4.

SSD Teardown PCB Front
SSD Teardown PCB Back

On the PCB you'll find the controller and four flash chips, a DRAM cache chip is included, too.


Lexar's sticker uses a white sticky tape that makes contact with the chips and has a shiny metal foil on top of that. This means less heat transfer, because heat has to travel through the white plastic adhesive first. The metal foil is also rather thin.

Chip Component Analysis

SSD Controller

The Silicon Motion Technology SM2508 controller is the company's first PCI-Express 5.0 controller for consumer applications. It supports PCIe 5.0 x4 and runs with eight flash channels at 3600 MT/s. SMI fabricates the controller using a 6 nanometer process at TSMC Taiwan.

SSD Flash Chips

The four flash chips are Micron B58R 232-layer 3D TLC NAND, they have been rebranded by Longsys, the parent company of Lexar. Each chip has a capacity of 1 TB.

SSD DRAM Chip

The DRAM cache chip, by Foresee, another Longsys brand, has a capacity of 4 GB and runs at LPDDR4-3733.

Test Setup

Test System SSD 2024
Processor:Intel Core i9-13900KS
Raptor Lake
6.0 GHz, 8+16 cores / 32 threads
Motherboard:ASUS ROG Z790 Dark Hero
BIOS 1102
Memory:2x 16 GB DDR5-6000
Graphics:PNY GeForce RTX 4080 Super Verto OC
Cooling:Valkyrie Syn 360 mm AIO
Thermal Paste:Arctic MX-6
Power Supply:Thermaltake Toughpower GF3 850 W
ATX 3.0 / 16-pin 12VHPWR
Case:darkFlash DRX70 White
Operating System:Windows 11 Professional 64-bit 23H2
VBS enabled (Windows 11 default)
Drivers:NVIDIA: 552.12 WHQL



Synthetic Testing

  • Tests are run with a 20-second-long warm-up time (result recording starts at second 21).
  • Between each test, the drive is left idle for 60 seconds, to allow it to flush and reorganize its internal data.
  • All write requests contain random, incompressible data.
  • Disk cache is flushed between all tests.
  • During these tests, M.2 drives are tested with additional active fan-cooling, to ensure thermal throttling can't happen

Real-life Testing

  • After initial configuration and installation, a disk image is created; it is used to test every drive.
  • Automated updates are disabled for the OS and all programs. This ensures that—for every review—each drive uses the same settings, without interference from previous testing.
  • Our disk image consumes around 700 GB—partitions are resized to fill all available space on the drive.
  • All drives are filled with random data to 85% of their capacity. This is intentional, to run the drive in realistic operating conditions—nobody uses a nearly-empty SSD in their system. It also puts additional stress on the pseudo-SLC cache subsystem, because there is less free NAND space to work with.
  • Partitions are aligned properly.
  • Disk cache is flushed between all tests.
  • In order to minimize random variation, each real-life performance test is run several times, with reboots between tests to minimize the impact of disk cache.
  • All application benchmarks run the actual application and do not replay any disk traces.
  • Our real-life testing data includes performance numbers for a typical high-performance HDD, using results from a Western Digital WD Black 1 TB 7200 RPM 3.5" SATA. HDDs are significantly slower than SSDs, which is why we're not putting the result in the chart, as that would break the scaling, making the SSDs indistinguishable in comparison. Instead, we've added the HDD performance numbers in the title of each test entry.
  • During these tests, M.2 drives are tested with additional active fan-cooling, to ensure thermal throttling can't happen
Our Patreon Silver Supporters can read articles in single-page format.
Nov 18th, 2026 15:49 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts