Introduction
Those who have found themselves in a local electronics store looking for a USB flash drive over the past decade might have seen Lexar-branded products on shelves. In the early days of home PCs, the company was a pioneer in flash memory. Later bought and owned by Micron Technology, the company again went up for sale in 2017. Longsys became the new owner, quickly expanding sales globally with numerous new product launches by rebranding some of the company's prior bestsellers. A few more years have passed since that acquisition, and Lexar continues to release new products for both consumers and prosumers alike.
Lexar has a number of established and successful products for computer system memory, including the DDR4 Hades and ARES series. Now the company has more new offerings for DDR5 with AREAS and THOR marketed towards PC gamers with extreme speeds up to 8400 MT/s.
Today, we will be taking a closer look at the Lexar THOR DDR5-6000 2 x 16 GB memory kit, which comes with primary timings suited for gamers. This THOR series also comes with AMD EXPO and Intel XMP profiles for maximum compatibility among a wide range of computers. Current Lexar THOR DDR5 configurations sold are limited to only 32 GB (2x 16 GB) memory kits with frequencies ranging from 5600 MT/s to 6000 MT/s without any RGB elements. Higher bins and RGB system memory are currently reserved for the Lexar ARES series. Now, with the introduction out of the way, let us now see how this memory kit stacks up against the competition, beginning with a look at the specifications.
Specifications
| Specifications |
|---|
| Manufacturer: | Lexar |
|---|
| Series: | THOR |
|---|
| Model: | LD5U16G60C32LG |
|---|
| Registered/Unbuffered: | Unbuffered |
|---|
| Error Checking: | ECC (resting) |
|---|
| IC Manufacturer: | SK Hynix |
|---|
| Form Factor: | 288-pin DIMM |
|---|
| Warranty: | Limited Lifetime |
|---|
| Ranks: | Single Rank |
|---|
| XMP Profile: | XMP-1 | EXPO-1 | JEDEC |
|---|
| Speed Rating: | DDR5-6000 MT/s | DDR5-6000 MT/s | DDR5-4800 MT/s |
|---|
| Rated Timings: | 32-38-38-96-134 | 32-38-38-96-134 | 40-40-40-77-116 |
|---|
| Tested Capacity: | 32 GB (2x 16 GB) | 32 GB (2x 16 GB) | 32 GB (2x 16 GB) |
|---|
| Tested Voltage: | 1.30 V | 1.30 V | 1.1 V |
|---|
Packaging
The first stop on this review trip is the packaging! Lexar covers the basics when it comes to informing the customer what they are buying. The front of the packaging has the brand, series, kit size, along with the binned speed. Flip the box around, and the back has a notation to visit the Lexar website for information about warranty and further product details. More information on the actual packaging would have been nice to see, like the primary timings used and applied voltage for this specific 6000 MT/s kit.
Removing the memory from the box only requires cutting some tape—the memory sticks are secured and protected from minor damage with a clamshell inside the outer box.
A Closer Look
Once the memory is out of the packaging, we can get a closer look at the Lexar THOR memory. Currently, only sold with Matte Black heatspreaders, it does not have any RGB elements to speak of either.
The name "THOR," along with the pattern design, gives the impression that it is taking inspiration from Norse mythology. Thor, the thunder God, along with Mjölnir, the hammer. The patterns on the sides are a nice addition, though once installed into the computer, they will no longer be visible.
On one side of each DIMM module is the identification sticker listing the rated XMP operating frequency, corresponding voltage of 1.30, and XMP / EXPO related primary timings. Lexar does not have the SKU number printed directly on the memory, which could be a point of confusion for those trying to look up more information without having to install the memory modules.
Laying the DIMMs on the side, we can see that these do not have any RGB elements and the top is also completely void of any text.
The Lexar THOR DDR5-6000 Z-height is 40 mm after rounding down with calipers and weighs in at 55 g on the scale.
After taking the heat spreader off, we see that these are single-sided DIMMs with eight 2 GB ICs. This is as expected for a DDR5 32 GB kit, since densities increased with DDR5. The thermal pad covers all the memory ICs. This particular kit does not have coverage for the PMIC and surrounding components, but the lower voltage of 1.30 and a lifetime warranty will put at ease those who are concerned about component longevity.
A closer look at the ICs and Lexar covering up the actual vendor with its own silkscreen. Currently, Micron, Samsung, and SK Hynix are the three big suppliers of DDR5 ICs. CPU-Z tells us this is SK Hynix and, from overclocking, these are the A-Die revision. Though, because Lexar (Longsys) is rebranding these, this could be different from batch to batch.
With DDR5, one of the major changes is how the motherboard directly provides 5 V to the memory module's PMIC, which is then stepped down and split accordingly. No longer is the motherboard responsible for regulating the voltages, as with DDR4. The PMIC has the part number "0P=AFKG1." Software reports this as Richtek being the manufacturer. Internet investigation provides no additional information.