I would like to thank Lian Li for supplying the review sample.
Lian Li managed to add another element of system lighting with the original Strimer series, which we also reviewed. The Strimer Plus V2 aims to provide that same type of power cable extension, but coupled with ARGB, and integrates both elements better than the original version. The Lian Li Strimer Plus V2 series provides a 24-pin ATX power cable extension and two PCIe offerings—one with two 6+2 connectors simply called the "Strimer Plus V2 8-Pin" and the other with a whooping three 6+2 connectors for even the biggest GPUs out there marketed as the "Strimer Plus V2 Triple 8-Pin." We will take a look at each of these in this review, and will dive into the companion software Lian Li provides for these units and their lighting ecosystem.
Strimer Plus
Strimer Plus V2
Materials:
Silicone/PVC
Silicone/TPE
Cable Length:
ATX: 200 mm / PCIe: 300 mm
ATX: 200 mm / PCIe: 300 mm
Cable:
18 AWG
18 AWG
LEDs:
ATX: 120 / PCIe: 108/162
ATX: 120 / PCIe: 108/162
LED Channel Width:
2.8 mm
2.1 mm
Thickness:
11 mm
8 mm
Max. Operating Temperature:
105°C
150°C
Each of the three SKUs ships in a black cardboard box sized to the extension cable size. These feature reflective elements and an image of what each of the cables looks like within.
Lian Li Strimer Plus V2 - 24-Pin ATX
Packaging and Contents
Lian Li doesn't pack the cables in any special way. Each of these is encased in a plastic bag with all the components.
This variant of the Strimer Plus V2 ARGB extension cable can be considered the base, and as such includes the controller alongside two double-sided pieces of tape for mounting within your chassis. Lian Li also includes a Micro-USB to USB 2.0 header adapter for data transfer. Last but certainly not least, there is a set of white clips to replace the user-facing black ones pre-installed on the extension cable. A basic manual and marketing pamphlet round out the accessories.
The controller sports a permanently attached SATA cable for power. Next to that, you will find a small plug for motherboard lighting control and synchronization of any Lian Li products. To the right of that is a Micro-USB connector to communicate with the host system. At the opposite end is a large, proprietary connector for the ATX extension lead. You will find the same plug on the side next to a smaller variant as well. These two are for the PCIe cables, but only one may be powered at any given time by using the tiny switch between them. Alternatively, you could buy two 3x PCIe connector variants of the Strimer Plus V2, buy the controller separately, and route them to two massive GPUs. However, with multi-GPU setups essentially non-existent these days, that is quite the edge case.