Introduction
Lian Li has been on a big surge the last few years when it comes to offering interesting PC DIY components, be it
cases, coolers, or fans. Indeed, I was initially reluctant to take on the
UNI FAN SL INFINITY 120 based on my previous experience with the brand's cooling products. I was the first, and probably the only one, to review the Lian Li CB-01 back in 2015, which happened to be the company's only CPU block to date. It was less than impressive to say the least, but there were glimpses of something going on in the background which manifested in the UNI FAN series with the novel daisy-chaining and various color and lighting options on hand. For those wanting to add more bling to their PC build, Lian Li had plenty to offer clearly, going as far as to sell
RGB cables even. Imagine my surprise then to see
an announcement of performance-focused UNI fans that I then had a chance to inspect further at Computex! One thing led to another and here we are with a review of the new Lian Li UNI FAN P28.
As far as I am aware, the new UNI FAN P28 is only available at 120 mm sizes currently. It does come in black or white color options and uses a liquid crystalline polymer rotor similar to the
Noctua NF-A12x25, the
Phanteks T30-120, and the
Thermaltake TOUGHFAN 12 that were all impressive from a performance aspect. The UNI FAN P28 is also 28 mm thick which Lian Li claims was done to allow for increased performance without affecting case compatibility too much—there is a nice feature integrated to accommodate radiator use too as we shall see. These are non-RGB fans that can get optional add-on RGB side frames, thus allowing you to choose between having black or white fans with or without LEDs. Thanks to Lian Li for providing review samples of the fan and the lighting kit to TechPowerUp and we begin with a look at the product specifications in the table below.
Specifications
| Lian Li UNI FAN P28 Fan |
|---|
| Dimensions: | 120 x 120 x 28 mm |
|---|
| Rated Speed: | 200 – 2600 RPM ±10% |
|---|
| Maximum Airflow: | 92 CFM (156.3 m³/h) |
|---|
| Noise: | 32.1 dBA |
|---|
| Static Pressure: | 4.79 mm H₂O |
|---|
| Fan Control: | 4-pin PWM (optional 3-pin ARGB) |
|---|
| Power Draw: | Not provided |
|---|
| Warranty: | Six years |
|---|
Packaging and Accessories
Lian Li sells the UNI FAN P28 in individual or triple-pack SKUs and I have the latter here which comes in a larger box as expected. It also underwent some extra love from the courier so I suppose this also shows the box does its job in protecting the items inside fairly well. On the front is the brand logo and product name, a confirmation of the fan size and color, a teaser of the fans themselves and some salient marketing features. More info is seen on the back including fan specs and a list of contents. There's not a lot going on the sides so at this point open the box from the top as seen above.
The 3-pack version comes with an extra fan controller but you should otherwise expect the unboxing experience to be fairly similar if you go with individual fans. This includes a manual (
online copy here for 3-pack SKU) which is somewhat confusing but at least has illustrations to help you figure out what the various cables do. This is good because Lian Li has proprietary connectors again, especially on the cable that connects to the fan itself. One end has the usual 4-pin PWM connector but then we get something which looks like the same connector opened up and having a lid at a right angle. Lian Li also includes here a male-female 4-pin PWM extension cable with the aforementioned fan controller module in the middle that has three settings of L/M/H. We then get a second extension cable except this one uses the UNI FAN magnetic pins to connect two groups of such fans together as we will see on the next page. The fans themselves come individually packed in a bubble wrap pouch and there are three sets of four metal self-tapping screws in the box too.