Mach Xtreme MX-ES 32 GB USB 3.0 Review 0

Mach Xtreme MX-ES 32 GB USB 3.0 Review

(0 Comments) »

Introduction


I would like to thank Mach Xtreme & Overclockers UK for supplying the review sample.


This time, we are taking a look at the Mach Xtreme MX-ES flash drive. It utilizes SLC-based flash to eliminate the weakness of most drives: their write speed. Do not let its look fool you. While the MX-ES may look just like their entry level CX unit, due to the choice of housing, the drive is advertised with speeds of up to 170 MB/s read and 185 MB/s write. Mach Xtreme even goes one step further and mentions that these benchmarks are attained with ATTO.

This is what Mach Xtreme has to say about their own flash drive:
Thanks to its use of advanced SLC NAND flash technology, the MX-ES USB 3.0 flash drive transfers data in the fast lane featuring ultra-high transfer rates making data transfer easy. The MX-ES Series USB 3.0 pen-drive utilizes SLC NAND flash to offer higher performance and longer endurance over traditional MLC NAND flash, which is typically used in other USB 3.0 pen-drives.

Packaging


Even though the Mach Xtreme MX-ES is the companies high-end drive utilizing SLC-based flash, the unit comes wrapped in a plastic mold that is, in turn, glued onto a cardboard sheet. It seems like the company cannot decide on a uniform type of packaging as they employ three different packaging methods for four different flash-drive families. The front of the package lets you see the entire drive and has a sticker that lets you know what capacity drive is found inside. You will find some promotional text and the drive's specifications on the back of the package.

A Closer Look


Before I start off, I would like to voice my opinion about the presentation of Mach Xtreme's flash drives. The company sells four different families of such units: MX-CX, MX-GX, MX-FX, and MX-ES. All four come with different company logos and a different type of labeling. The high-end MX-ES we are reviewing today does, on top of that, utilize a rebrand of the same simple OEM housing used with the MX-CX variant. While this is something that may be forgiven with a value oriented USB 2.0 drive, users may be put off by the simplistic housing of the MX-ES. The casing is, on the other hand, made of aluminum, which is nice and sturdy.


The MX-ES is rather compact for a USB 3.0 device as it is not only thinner but also a bit shorter than many other units. A loophole on the rear allows you to attach the unit to your keychain. Unfortunately, this part is made of plastic and experience has shown that such a piece does not manage to hold long without breaking.


A clear, plastic cap protects the USB connector, which is easily removed. Loosing this cap is a real possibility, especially since it is clear. It would have been nice if Mach Xtreme would have gone with a red aluminum cap instead.


You will find the FCC and CE logo laser-edged onto one side of the connector. The other side holds a number ending with 32G to denote its internal capacity. Mach Xtreme refrains from placing the capacity on drive housing, which is quite unusual.
Our Patreon Silver Supporters can read articles in single-page format.
Nov 21st, 2026 04:41 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts