MSI GeForce RTX 4080 Suprim X Review 6

MSI GeForce RTX 4080 Suprim X Review

Cooler Performance Comparison »

Temperatures

Temperature & Noise Comparison
IdleGaming
GPUNoiseGPUHotspotMemoryNoiseRPM
ASUS RTX 4080 STRIX OC39°CFan Stop62°C72°C60°C32.1 dBA1350 RPM
ASUS RTX 4080 STRIX OC (Quiet BIOS)40°CFan Stop63°C73°C62°C30.4 dBA1117 RPM
Colorful RTX 4080 Ultra W OC39°CFan Stop64°C74°C60°C38.3 dBA1817 RPM
Colorful RTX 4080 Ultra W OC (Turbo BIOS)39°CFan Stop67°C76°C62°C40.1 dBA1952 RPM
Gainward RTX 4080 Phantom GS43°CFan Stop64°C74°C60°C31.5 dBA1580 RPM
Gainward RTX 4080 Phantom GS (Quiet BIOS)42°CFan Stop65°C75°C62°C30.4 dBA1376 RPM
MSI RTX 4080 Gaming X42°CFan Stop68°C79°C68°C26.9 dBA1232 RPM
MSI RTX 4080 Gaming X (Gaming BIOS)42°CFan Stop64°C74°C63°C31.4 dBA1949 RPM
MSI RTX 4080 Suprim X42°CFan Stop66°C76°C70°C26.8 dBA1121 RPM
MSI RTX 4080 Suprim X (Gaming BIOS)41°CFan Stop59°C67°C63°C33.0 dBA1507 RPM
NVIDIA RTX 4080 Founders Edition35°CFan Stop63°C73°C68°C34.3 dBA1356 RPM
PNY RTX 4080 OC34°CFan Stop64°C74°C59°C26.1 dBA1175 RPM
Zotac RTX 4080 AMP Extreme AIRO39°CFan Stop63°C73°C61°C36.9 dBA1248 RPM
Zotac RTX 4080 AMP Extreme AIRO (Quiet BIOS)44°CFan Stop64°C75°C64°C36.0 dBA1208 RPM
Testing notes & interpretation
  • GPU temperatures listed here are based on GPU-Z measurements of the on-chip temperature sensor.
  • We report these GPU temperatures under a constant load for ease of comparison, as well as an idle state most end users will experience often. This combination helps dictate cooling needs and provides context for how well the thermal solution performs.
  • Please note that GPU temperature is contingent on a variety of factors. Some, including clock speed, voltage settings, cooler design, and production variances, are beyond the control of the end user. Others, such as ambient temperature, case design, and airflow pathway affecting the GPU, can be mitigated to certain extents.
  • The data in the table above shows results for similar cards, achieved in identical conditions during previous TechPowerUp reviews.

Thermal Analysis

For this test, we first let the card sit idle to reach thermal equilibrium. Next, we start a constant 100% gaming load, recording several important parameters while the test is running. This shows you the thermal behavior of the card and how the fans ramp up as temperatures increase. Once temperatures are stable (no increase for two minutes), we stop the load and record how the card cools down over time.

GPU Clock, Voltage Temperature, Fan Speed over Time


We also ran the same test for the "gaming" BIOS



Fan Noise

Noise Testing Details
  • The tested graphics card is installed in an open bench system. The system does not emit any noise on its own, all components are passively cooled.
  • All cards are loaded with the same test: a custom-engineered game-like load in Unreal Engine 4 that always renders the same frame at 60 FPS to minimize variance.
  • To ensure 100% loading of the GPU, the render complexity is set dynamically so that each card operates at peak performance without being CPU limited.
  • We're not using Furmark because it creates too high a load that forces fans to run faster than what is encountered during typical gameplay.
  • Noise results of other cards on this page are measurements of the respective reference design.
  • We let the card heat up and wait for fan speed to no longer change. Depending on the fan-control algorithm, this can often take quite some time.
  • Noise level measurements are conducted using a 1/2" calibrated measurement microphone that records onto the host PC using a digital audio processing pipeline. The microphone is recalibrated at least once a month.
  • Measurement distance is 50 cm. Our previous noise-level measurements took place at a distance of 1 m. We reduced the distance to be able to better distinguish acoustics of the very quiet graphics cards.

Fan Noise Idle
Fan Noise Gaming
Next Page »Cooler Performance Comparison
View as single page
Oct 16th, 2024 03:06 EDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts