MSI MPG Ai1600TS Review 19

MSI MPG Ai1600TS Review

Value & Conclusion »

Result Summary

Full-Range Load Testing (230 V)
All-rail
Load
12 V5 V3.3 VPower
(DC/AC)
EfficiencyFan
Speed
Noise
Level
Power
Factor
0 %0.00 A0.00 A0.00 A0.00 WN/AFan Stop0.03
12.06 V5.05 V3.34 V0.14 W
5 %5.70 A1.00 A1.00 A80.00 W88.01 %Fan Stop0.75
12.05 V5.04 V3.33 V90.90 W
10 %11.48 A1.98 A1.98 A160.01 W92.43 %Fan Stop0.84
12.06 V5.04 V3.33 V173.10 W
20 %24.01 A2.98 A2.97 A320.05 W93.53 %Fan Stop0.93
12.05 V5.04 V3.33 V342.20 W
30 %36.82 A3.48 A3.47 A479.30 W93.66 %460 RPM26.2 dBA0.94
12.04 V5.03 V3.33 V511.75 W
40 %49.75 A3.98 A3.97 A639.75 W94.25 %465 RPM26.2 dBA0.96
12.03 V5.03 V3.33 V678.80 W
50 %62.28 A4.97 A4.96 A799.50 W94.27 %468 RPM26.2 dBA0.97
12.03 V5.03 V3.33 V848.10 W
60 %74.95 A5.97 A5.96 A960.10 W93.94 %572 RPM26.9 dBA0.97
12.01 V5.02 V3.33 V1022.05 W
70 %87.50 A6.97 A6.95 A1119.70 W93.48 %640 RPM28.0 dBA0.98
12.01 V5.02 V3.32 V1197.85 W
80 %100.18 A7.97 A7.94 A1279.75 W93.01 %825 RPM28.6 dBA0.97
12.00 V5.02 V3.32 V1375.90 W
90 %113.20 A8.48 A8.43 A1439.55 W92.49 %1172 RPM30.6 dBA0.98
11.99 V5.01 V3.32 V1556.45 W
100 %126.05 A8.98 A8.94 A1599.60 W91.92 %1495 RPM37.7 dBA0.98
11.98 V5.01 V3.32 V1740.30 W
110 %138.88 A9.99 A10.03 A1760.25 W91.25 %1832 RPM43.1 dBA0.98
11.97 V5.01 V3.32 V1928.95 W

Efficiency





Based on our 230 V test results, this power supply clears the requirements for an 80 Plus Platinum certification, however it falls just short of a Titanium rating. These findings are in line with certification by Cybenetics, who award it a Titanium rating at 110 V, but not 230 V. With efficiency peaking at 94.27% under a 50% load and remaining resilient at 91.92% under absolute maximum strain, it easily meets the standard Platinum thresholds (92% at 20% load, 94% at 50% load, and 90% at 100% load). While it falls just a percentage point or two shy of the stringent mid-load requirements needed for an 80 Plus Titanium badge, this performance profile places it squarely in the upper tier of high-wattage units.


Rated Efficiency Validation (230 V)
Certification: 80 Plus Platinum
Test LoadRequiredMeasuredMarginStatus
20%92.00 %93.53 %+1.53 %Pass
50%94.00 %94.27 %+0.27 %Pass
100%90.00 %91.92 %+1.92 %Pass

Fan Noise



Voltage Regulation

As with almost all modern PSUs, the internal feedback loop regulating the output voltage at the supply itself is extremely effective.

Voltage Regulation
Test Load+12 V+5 V+3.3 VStatus
Idle12.06 V5.05 V3.34 VPass
110% load11.97 V5.01 V3.32 VPass

Cable Quality

Although voltage regulation inside modern PSUs is extremely stable, voltage drop and thus power losses will occur across the cables as current is drawn through them. This results in a lower voltage available to the system components than what is actually measured at the PSU outputs. Thicker cables will cause less voltage drop and more power to the components. Any power lost across the cables is wasted as heat in the wire itself. By measuring the voltage drop at a known load, we can calculate the resistance of the cables.

Cable Losses at Full Load
Applied 12 V Load133.3 A
Measured @ Supply11.98 V
Measured @ Load11.57 V
Power Lost in Cable54.65 W
Per-Cable Resistance64.6 mΩ





As expected, cable resistance appears to drop as the power rating of the supply rises. As more reviews are conducted, we will be able to single out those which perform above or below par in regards to cable quality.

Ripple

Ideally you want the DC voltage delivered by your power supply to be a completely flat line when looking through an oscilloscope. However, due to the switching nature of the ATX power supply and the less than ideal real-world behavior of all the components involved, we get very small fluctuations in the voltage output, known as ripple and noise. The ATX spec allows a ripple of up to 120 mV for the +12 V rail and 50 mV for the minor rails.

Ripple (mV) @ 230 V
Test Load12 V5 V3.3 VStatus
10%29.65 mV19.85 mV20.40 mVPass
20%29.50 mV21.90 mV21.88 mVPass
30%27.20 mV20.85 mV20.15 mVPass
40%30.10 mV21.50 mV21.95 mVPass
50%32.05 mV22.10 mV22.15 mVPass
60%34.15 mV21.45 mV22.40 mVPass
70%34.30 mV20.55 mV20.75 mVPass
80%36.65 mV20.70 mV21.85 mVPass
90%36.85 mV20.45 mV21.25 mVPass
100%41.25 mV20.65 mV20.60 mVPass
110%42.75 mV22.15 mV21.35 mVPass



The ripple across all rails is controlled and well within specification, although we have seen better results from competing supplies in this tier.

Short Circuit Protection

Short circuit protection is one of the most fundamental and important protections for a power supply. If a short circuit is detected on any rails, the PSU should turn off and prevent damage to itself and other components.

Short Circuit Protection
+12 V railOperational
+5 V railOperational
+3.3 V railOperational

SCP was working as expected with the unit.
Next Page »Value & Conclusion
View as single page
Nov 18th, 2026 13:50 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts