VRM Overview
The power delivery appears to be identical to the MEG X870E Ace Max, with an 18-2-1 phase design. The VRMs themselves were kept well below 70°C, although the peak of about 68°C was a little toastier than we'd like. As we noted with the Ace, the inclusion of RGB lighting paraphernalia on top of the VRM heatsink which itself has the USB4 controller to deal with as well likely results in higher temperatures. This was in our open test bench with minimal airflow though, so results will likely be better inside a well-cooled case.
The VRM heatsinks are in two parts that are linked using a heatpipe to spread the load, should one heatsink be able to better tap into your system's airflow and remain significantly cooler. The board does lack rear cooling using a backplate, though, which is present on the more expensive Ace.
We have the same Renesas R2209004 110 A power phases for all 18 vCore stages as well as SOC as there is on the more expensive Ace as well as an Alpha Omega Semiconductor BR00 5XES stage for MISC.
For PWM controllers we have a Renesas RAA229620 and Richtek RT3672EE - again identical to those on the Ace.