NZXT Lift Elite Wireless Review 3

NZXT Lift Elite Wireless Review

(3 Comments) »

Value and Conclusion

  • The NZXT Lift Elite Wireless is available for $79.99.
  • High side button quality
  • Good scroll wheel
  • Good choice of components
  • Lightweight
  • Flexible charging cable
  • Nicely gliding mouse feet
  • Full software customizability
  • Wireless extender included
  • Set of grip tape included
  • High motion delay across the board, in particular at 1000 Hz wireless
  • Click latency at 1000 Hz is bugged
  • 8000 Hz wired is broken
  • Polling instability across the board
  • Somewhat mushy main buttons
  • Lackluster battery life
  • Resource-heavy and somewhat buggy software
  • CPI adjustment arbitrarily limited to increments of 100
Released roughly a year ago, the Lift 2 Ergo and Lift 2 Symm were decent mice, but nothing more. In terms of shape, the Lift Elite Wireless has nothing to do with either of those mice. With its wide middle area and narrow rear, the medium-sized Lift Elite Wireless lends itself mostly to larger hands, yet lacks the palm support those larger hands would desire. As such, the ergonomics of the Lift Elite Wireless appear rather questionable. The shell design is shared with the Lift 2 Ergo and Symm: while the top shell is solid, the bottom remains open, similarly to releases from Pulsar or LAMZU. The issue with this approach on the Lift Elite Wireless is twofold: First, at 57 g, the Lift Elite Wireless is decently light, but given that there are similarly sized mice with fully solid shells and weighing 10 g less by now, this sort of open-bottom design is more difficult to justify these days. Second, and despite the weight, build quality still isn't as solid as it should be. When shaking, a minor rattle comes from an indeterminable location, and when applying lateral pressure, there is significant creaking. This is doubly confusing given that a large plastic assembly holding the battery is screwed to the top shell, which could and very well should be used to improve structural rigidity, yet it isn't. On the plus side, there is no flexing at least, and actuating the side buttons by pressing below them cannot be done regardless of force.

Recently, Omron D2FP-FN2 have emerged as the optical switch of choice for the main buttons on many mice, yet for the Lift Elite Wireless, NZXT has opted for the older and less popular optical switches from TTC, which have seen use on the Fantech Helios II Pro as well as multiple releases from Corsair. These switches are known for producing a rather mushy and unsatisfying button response, and this is certainly the case on the Lift Elite Wireless as well, although actuation is somewhat aided by the button design, which lends these switches some level of firmness. The low pre and moderate post-travel has these buttons feel decent at least, though the high level of lateral movement certainly isn't ideal, albeit I didn't notice much of it when actually using the mouse. The side buttons fare much better by comparison. This is surprising in that the buttons themselves are rather large, yet a set of small 2-pin, low-profile Huano switches (white plunger) are used for these, which provide very low pre- and post-travel, although the back button is lacking in terms of feedback. The scroll wheel encoder comes from Kailh, and while tactility is quite good on this one, with adequately distinct steps, noise levels are rather high regardless of scroll direction. Lastly, the feet are the usual white-dyed PTFE fare and glide well.

Performance is a mess on the Lift Elite Wireless. On paper, it should be good: PixArt's PAW3395 sensor is paired with a Nordic nRF52840 MCU for wireless communication, along with an NXP LPC5516 MCU providing a USB High-Speed PHY enabling 8000 Hz polling in wired operation. In practice, things are looking grim, however. CPI deviation is low at least, though NZXT CAM, which is the software for the Lift Elite Wireless, introduces a completely arbitrary restriction when it comes to CPI adjustment. Even though the 3395 supports adjustment in increments of 50, the software artificially limits this to increments of 100. Another software bug concerns MotionSync. A toggle is present, but does absolutely nothing, leaving MotionSync permanently enabled regardless of setting. Now, this wouldn't be an issue if MotionSync were latency-neutral, but the Lift Elite Wireless suffers from copious amounts of motion delay, and it appears very likely that this is at least partially due to MotionSync, as latency is increased far more than expected each time polling rate is halved, as if a full interval of latency were added. Even in wired operation, the Lift Elite Wireless is trailing the Logitech G403 (control subject) by 1.5 ms at 1000 Hz, 1 ms at 2000 Hz, and 2 ms at 4000 Hz. 8000 Hz is plain broken: aside from elevated variance, which effectively prevents measuring motion delay altogether, there are frequent null reports, and CPI is somehow lowered by roughly 20% compared to all other polling rates. The target interval of 0.125 ms is mostly hit (i.e., 0.126 ms are averaged), but I consider 8000 Hz broken to where it should be avoided entirely. Click latency at least is quite good: at 0.8 ms, the Lift Elite Wireless isn't breaking any records, but gives no reason for criticism, either.

Wireless operation doesn't fare better, far from it in fact. At 1000 Hz, the Lift Elite Wireless trails the G403 by 8 ms, which is comparable to your average Bluetooth mouse and renders the mouse essentially unusable for anything where latency is relevant. At 2000 Hz, we're looking at 2.5 ms, and at 4000 Hz, we're looking at 3 ms. This is about on par with what 1000 Hz wireless mice mustered roughly five years ago, and even something nearly ancient such as the Razer Viper Ultimate is running circles around the Lift Elite Wireless, all while being limited to USB Full-Speed. In terms of click latency, 2000 and 4000 Hz do quite well at around 1.0 ms, yet 1000 Hz once again is the outlier at 3.6 ms, and given the large standard deviation observed at this polling rate only, I'm positive that something is bugged, as some clicks will be on par with 2000/4000 Hz, yet others horribly delayed. For the record, the Lift Elite Wireless suffers no latency issues in regard to lift-off, simply because no delay is added upon lift-off. Despite this, there is no slam-clicking. On top of poor latency across the board, the Lift Elite Wireless also suffers from polling instability across every single polling rate no matter if it is wired or wireless—there isn't a single polling rate that could be considered stable. You can expect instances of elevated variance, noise, and off-periodic polls, the full package if you will. In short, the Lift Elite Wireless is among the worst performing mice reviewed in quite a while here on TechPowerUp.

The mundane act of turning one's mouse on and off has a layer of complexity added on the Lift Elite Wireless. First, in order to turn the mouse on, one has to hold the button on the bottom for at least three seconds. Okay, fair enough, that's not too hard. Turning it off by holding it for more than three seconds also isn't too complicated. Things quickly get messy when it comes to cycling CPI steps or profiles, however. In order to cycle CPI steps, you need to press the button for less than 0.5 s. Press it for more than 0.5 s, but less than three seconds, and you'll be cycling profiles instead of CPI steps. When the Viper V2 Pro introduced this sort of one-button-does-all approach, I was still mostly on board with it, but the Lift Elite Wireless takes things at least two button presses too far. Having to time your button presses isn't exactly intuitive, and once it comes to interpreting the color codes displayed by the LED, you definitely need the manual. In this context it is also worth mentioning that turning the mouse off indeed is imperative, as the software setting that is supposed to turn off the mouse after a set period of time doesn't work the way one would expect it to work. Rather, as long as the battery has a little charge left, the mouse will merely enter sleep mode, unless the dongle has been unplugged, in which case the mouse will actually turn off. If this setting isn't enabled, the mouse will in fact not only not turn off, but never sleep either. From what I can tell, this setting also requires NZXT CAM to be running to work as intended. Suffice to say, this design is as backwards as possible. There is also the fact that after having the mouse plugged in, it continues to be on, so if you only had it plugged in for charging but don't want to use it wirelessly afterward, you have to make sure to turn it off. Ultimately, I wouldn't mind any of these shenanigans if it would allow the Lift Elite Wireless to land ahead of the competition in terms of weight, yet there are many mice these days that have solid shells, better build quality, weigh less, and can be turned off and on with a simple slider—no manual required.

Another reason why turning the mouse off properly is so important is the fact that battery life isn't exactly great on the Lift Elite Wireless. Judging from the battery life indicator, which displays a single-digit percentage with decent accuracy, the Lift Elite Wireless musters around 10 hours of battery life at 4000 Hz, which is less than what many other mice utilizing the same 300 mAh capacity batteries can do at 8000 Hz these days. NZXT cites 70 hours at 1000 Hz, which should translate to around 15 hours at 4000 Hz, but it appears the Lift Elite Wireless misses even this low bar. Charging at least is quite speedy at more than 0.3 A, and the charging cable is flexible enough to allow playing while charging as well as wired usage proper without feeling overly restricted. Speaking of the software, this one is largely functional aside from the mentioned bugs and restrictions regarding MotionSync and CPI adjustment, though the resource usage certainly exceeds acceptable limits. When looking at the mouse settings, roughly 288 MB are occupied, which can balloon to more than 500 MB when the monitoring tab is active. Thankfully, there are five on-board profiles one can load with all the settings one could think of, but given the already described layer of complexity associated with the act of cycling profiles, I'm not sure whether this passes for an actual solution. In addition, even with CAM installed but not running, there will be two processes running in the background all the time provided CAM has been launched at some point during the session.

At $79.99, the Lift Elite Wireless is quite reasonably priced relative to the competition, but given the significant and broadly present issues with performance, one could say that any amount is difficult to justify. With so many mice available that have no such performance flaws, weigh less while having a solid, non-creaking shell, less resource-heavy software, better main buttons, and higher battery life, making a case for the Lift Elite Wireless is almost impossible. Even the shape isn't particularly comfortable. In short, even if one day a generous application of arcane magic were to make all performance issues vanish, I'd probably still pass on this one.
Discuss(3 Comments)
View as single page
Nov 21st, 2026 01:57 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts