Packaging and Accessories
The box is quite a step back to what we are used to seeing from modern PSU packaging, using thinner cardboard and opening along the top only rather than fully folding out. The design is very simple, with a photo of the PSU centered against a solid gray background, alongside branding and certifications. There aren't really any accents or extravagant designs.
At the rear we find a list of specifications, a power distribution table, and noise/efficiency graphs.
The box opens from the top, revealing very simple packaging with two foam blocks holding the PSU in place, and the cable accessories and manual by themselves to the side. In addition to the cables, Ocypus includes branded Velcro cable wraps, and mounting screws.
Cables
| Modular Cables |
|---|
| Cable type | Connectors per cable | Length | Cable count |
|---|
| MB (20 + 4 pins) | 1 | 600 mm | 1 |
|---|
| CPU (4 + 4 pins) | 1 | 700 mm | 2 |
|---|
| 12V-2x6/PCIe 5.1 (12 + 4 pins) | 1 | 600 mm | 1 |
|---|
| PCIe (6 + 2 pins) | 1 | 650 mm | 3 |
|---|
| SATA | 4 | 500 + 150 + 150 + 150 mm | 2 |
|---|
| 4-pin Molex | 2 | 500 + 150 mm | 1 |
|---|
There are enough cable types included for most high-end desktop builds, including dual 8-pin CPU cables, and a trio of PCI-e 8-pin cables.
As often seen now, each wire is textured, and the groups of wires are attached forming a flat ribbon. These can be pulled apart into separate wires if desired. This offers maximum installation flexibility, and minimum work is required if you want the wires adhered together.
The connectors are labelled on both ends in large clear font.