OCZ PC2-6400 ReaperX HPC 4GB Kit Review 20

OCZ PC2-6400 ReaperX HPC 4GB Kit Review

(20 Comments) »

Introduction


I would like to thank OCZ Technology for supplying the review sample.

From the company's product page:
  • 800MHz DDR2
  • EPP 4-4-3-15* (CAS-TRCD-TRP-TRAS)
  • Available in 4GB (2x2048MB) Dual Channel Kits
  • Unbuffered
  • OCZ Lifetime Warranty
  • 2.1 Volts
  • 240 Pin DIMM
  • ReaperX HPC Heatsink
  • 2.2V EVP
  • Enhanced Performance Profiles (EPP)

Packaging & Contents


OCZ Packages the ReaperX in a sturdy and clear plastic mold. The sides have been welded shut as well, so that the heavy memory won't push it apart. The front shows the ReaperX in all their glory, while the back goes into detail about the design and also shows the heatsink above the modules.

A Closer Look


The heatsink and spreaders of the ReaperX are absolutely massive and quite heavy. The large array of fins is connected to the DIMMs with two flattened heat pipes. The black aluminum parts are held together by screws as well as thermal tape. I would not recommend taking the unit apart, as the tape has been pressed onto the ICs quite firmly. You may end up damaging the parts.


One side holds the label of the memory. You will find all needed information on them - except the voltage it is intended to run at. Both sides also have the OCZ logo edged into the black heatspreaders.


Taking a closer look at the fins, which rise about an inch above the memory, it becomes apparent that they are not quite symmetrical. OCZ has designed them this way, to take up as little space as possible. The heat pipes actually touch the memory ICs directly with the use of thermal tape, passing on the heat to the very well constructed fins above the unit.

Our Patreon Silver Supporters can read articles in single-page format.
Nov 18th, 2026 23:00 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts