OCZ Vector 180 240 GB Review 3

OCZ Vector 180 240 GB Review

(3 Comments) »

Introduction

OCZ Logo


OCZ is one of the earliest adopters of SSD technology, and their products have always been at the forefront of technology. After some financial issues in 2012, the company was bought by Toshiba. Last year, OCZ completed their transition to use Toshiba flash chips only, and today, we are reviewing the Vector 180, their first new product in 2015.

The new OCZ Vector 180 is based on the Indilinx Barefoot 3 controller: It is, given Indilinx was acquired by OCZ in 2011, the first OCZ controller with 100% in-house technology.

The Vector 180 uses 19 nanometer NAND flash made by Toshiba, with the Barefoot 3 controller connected to a SATA 6 Gbps interface. The major change as compared to the Vector 150 is that the Vector 180 now includes Power Failure Management logic. It detects power anomalies to protect already stored data on the drive to, for instance, avoid bricking the whole SSD because of a power failure. In-flight data is not protected, neither is unflushed data in the operating system's write-cache. The power-failure-protection feature is achieved by using firmware logic and a small amount of capacitance on the SSD.

OCZ offers the Vector 180 in capacities of 120 GB ($90), 240 GB ($150), 480 GB ($275), and 960 GB ($500).

Specifications: OCZ Vector 180 240 GB
Brand:OCZ
Model:VTR180-25SAT3-240G
Controller:OCZ Barefoot 3 IDX500M00-B0
Flash Type:Toshiba, 19 nm MLC
TH58TEG7DDJBA4C
Form FactorSATA 2.5"
Thickness:7 mm (Ultrabook compatible)
Capacity240 GB (223.6 GB usable)
16 GB additional overprovisioning
Interface:SATA 6 Gbps
Firmware:1.00
TRIM supported:Yes
NCQ supported:Yes
Warranty:5 Years

Packaging

Package Front
Package Back




The Drive

SSD Front
SSD Back

The drive conforms to the dimensions set forth by the 2.5" form factor. It is made of metal to improve its durability and is only 7 mm thick, which makes it compatible with Intel's Ultrabook specification.

SSD Interface Connector

Like most recent SSDs, the OCZ Vector 180 uses the SATA 6 Gbps interface. It is compatible with any older SATA standard, but will, in such a case, work at reduced performance.

SSD Teardown PCB Front
SSD Teardown PCB Back

You will find the SSD controller and 16 flash chips on the PCB. A DRAM chip is also present; it provides the SSD controller with RAM.

SSD Controller

OCZ is using the same Barefoot 3 controller as on the Vector 150.

SSD Flash Chips

The 16 MLC flash chips are produced by Toshiba and are built on a 19 nanometer process.
Our Patreon Silver Supporters can read articles in single-page format.
Nov 17th, 2026 16:30 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts