PC Power & Cooling Silencer MK III 1200 W Review 7

PC Power & Cooling Silencer MK III 1200 W Review

(7 Comments) »

Introduction


We would like to thank PC Power & Cooling for supplying the review sample.

PC Power & Cooling is a legendary company in the Power Supply Unit (PSU) field. Their MK3 series was a milestone since it abandoned two features that all of their products used to have, the non-modular cabling design and the rear mounted, 80 mm cooling fan. Apparently, a company must, as the competition increases, move forward without sticking to old beliefs. On the contrary, it has to be versatile and able to quickly utilize contemporary designs/techniques that offer more than older ones. Thankfully, this was exactly what PC P&C did with their MK3 PSU series and we now have, after testing a couple smaller units with 400 W and 600 W capacities in the past, the chance to evaluate the flagship of the MK3 series, which can deliver up to 1200 W of power.

The new Silencer MKIII 1200 W or MK3S1200 is the first PC P&C PSU that features platinum efficiency. On top of that, while other MK3 units belong to mainstream and medium levels, price and performance wise, this one is clearly a high-end unit that can easily meet the competition eye to eye. (Corsair AX1200i, Antec HPC-1000, Seasonic P1000 etc.) Before we skip to the main review, let's take a quick look at the most important characteristics of the MK3S1200. For starters, this unit can deliver its huge power even at 50°C ambient continuously and with reduced noise output since it promises up to 90% less noise per Watt. Also, only Japanese caps can be found in its internal, something that highly contributes to the unit's long lifetime. Two notable features are the modular cabling system that utilizes heavy duty connectors, which ensure optimal contact and lower voltage drops, and the dual thermal control system that offers two modes of operation, normal and silent. With the flip of a switch, the PSU's fan is not engaged in lower loads/ambient, dropping the noise output to zero. Finally, the provided warranty of seven years ensures the buyer's peace of mind for a long time.


Specifications

PC Power & Cooling MK3S1200 Features & Specs
Max. DC Output1200W
PFCActive PFC
Efficiency80 PLUS Platinum
Operating temperature0°C - 50°C
ProtectionsOver Voltage Protection
Under Voltage Protection
Over Power Protection
Short Circuit Protection
Cooling140 mm Double Ball-Bearing Fan
Dimensions150 mm (W) x 86 mm (H) x 180 mm (D)
Weight2.7 kg
ComplianceATX12V v2.31, EPS 2.92
Warranty7 years
Price at time of review (exc. VAT)$299.99

The unit carries the highest efficiency rating, the Platinum one, with the manufacturer stating that it can deliver its full power continuously even up to 50°C. Protection features are restricted to the basic ones with OTP (Over Temperature Protection) missing. This is a shame since OTP is essential for a PSU, especially during fan-less operation. Finally, the cooling fan uses double ball-bearings for increased lifetime.

The unit is 18 cm long. All normal-sized cases will easily accommodate it. Its weight is on the high side because of the big heatsinks used to allow for fan-less operation at lower loads. The warranty is extra-long at seven years and the price looks kind of intimidating, putting the PSU into the same category as the top gun Corsair AX1200i. We expect a hell of a performance from the MK3S1200 in order to be able to keep up with the Corsair unit since the latter is, aside from an excellent performance, also backed up by DSP control along with the corresponding monitoring/controlling software.

PC Power & Cooling MK3S1200
Power Specs
Rail3.3V5V12V5VSB-12V
Max. Power20A20A99.5A2.5A0.5A
100W1194W12.5W6W
Total Max. Power1200W

There is only a single and powerful +12V rail able to deliver almost 100A. That is lots of power and few systems out there will be able to stress this PSU. The minor rails are kind of weak, at least compared to other PSUs of this category, but you don't have to worry since a contemporary system only draws few Amperes off minor rails. Finally, we expected a stronger 5VSB rail from a 1.2 kW unit, but, Super Flower (the unit's OEM) didn't do us this favor. It is high time for them to design a stronger 5VSB circuit to use with, at least, their higher capacity platforms.

Cables & Connectors, Power Distribution

Native Cables
ATX connector (625mm)20+4 pin
4+4 pin EPS12V/ATX12V (640mm)2
6+2 pin PCIe (580mm)2
Modular Cables
6+2 pin PCIe (580mm)4
SATA (400mm+150mm+150mm+150mm)12
4 pin Molex (400mm+150mm+150mm+150mm)4
FDD adapter (+150mm)1

There are a lot of native cables for our taste. The second EPS cable could easily be modular since most mainboards only need one. There are only a few PCIe connectors for the capacity of the PSU. We expected it to have at least eight or nine, not only six. The same applies to the peripheral connectors; two or three more would be ideal. All cables are, thankfully, extra-long with the distance among all connectors being quite large. All modular cables are flat, something that will make cable management tasks easier. Finally, the ATX connector and the native PCIe ones utilize 16AWG wires, while all other connectors use the standard 18AWG gauges.

Since this PSU features a single +12V rail, we do not have anything to comment on about its power distribution.
Our Patreon Silver Supporters can read articles in single-page format.
Nov 21st, 2026 06:07 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts