The Logitech G502 and Razer Basilisk continue to be among the best-selling gaming mice, which is why it comes as no surprise that other manufacturers are eager to get a piece of that cake, too. Mostly known for their graphics cards, PowerColor throws their hat in the ring with the ALPHYN AM10, whose shape is closely modeled after the aforementioned mice. The ALPHYN AM10 is a bit shorter than the Basilisk V3 Pro, for instance, and some aesthetic details differ, but by and large, these are the same shapes. At 95 g, the ALPHYN AM10 is a decent bit lighter than the 113 g Basilisk V3 Pro, but falls short of competitors such as the DAREU A980 Pro Max at 76 g or Glorious Model I 2 Wireless at 74 g, though unlike the others, the Model I 2 Wireless has holes. Build quality is in a good spot on the ALPHYN AM10. When shaking the mouse, there is no rattle, when applying lateral pressure, there is no creaking or flexing of the shell, and when pressing below the side buttons, they are not actuated.
For the buttons, PowerColor has opted for Omron D2FP-FN2 switches, which is currently the most popular optical switch series. Despite moderate pre- and post-travel, these feel firm and snappy. Button design isn't ideal, as a moderate (right button) to high (left button) degree of lateral movement can be provoked, though this doesn't really become noticeable during actual use. The side buttons are outfitted with switches from Kailh and are a mixed bag. The forward button feels nice, owing to low pre- and post-travel, but the back button has significant pre-travel, which—along with uneven actuation—has it feel quite mushy. The scroll wheel is interesting, with a design rather reminiscent of the Razer Naga V2 Hyperspeed. Usually, the encoder is soldered to the main PCB, and the wheel simply sits on two plastic stems. In this case, however, the scroll wheel is suspended in a half-enclosure together with the encoder, which then presses down on the scroll wheel switch located on the main PCB. The encoder isn't clearly identifiable, but from what I can tell, it is a TTC white (or "silver") encoder. This one provides a good level of tactility, with nicely separated steps, coupled with pleasantly low noise levels. The feet are the usual white-dyed PTFE fare, but glide well.
In terms of polling rate, the ALPHYN AM10 does things a bit differently than others. Owing to an NXP LPC5516 MCU, which provides a USB High-Speed PHY, polling rates of up to 8000 Hz are possible in wired operation. Wireless operation, on the other hand, is restricted to USB Full-Speed and therefore 1000 Hz. Notably, a wireless extender is not included with the mouse. Most mice that use a nano dongle, which can be plugged directly into one's PC (or another suitable host), include a wireless extender, which serves multiple purposes. First, it allows one to keep the distance between mouse and dongle as small as possible; second, it enables one not having to plug it directly into a USB 3.x port, which may introduce local interference adversely affecting wireless operation. These days, not every host still has USB 2.0 ports, which is why including an extender at least as an option could be considered the bare minimum on any mouse, especially on one that costs $99.99. Frankly, this omission is simply baffling, and there isn't even a storage compartment or something of the like on the mouse, so the nano dongle is easily lost, too.
In wired operation, the ALPHYN AM10 performs rather well. CPI deviation is kept to a minimum, and general tracking shows no issues, owing to MotionSync being permanently enabled. MotionSync is probably also the reason why motion delay is good, but not as good as it could be. At 1000 Hz, the ALPHYN AM10 is behind the Logitech G403 (control subject) by 0.5 ms, whereas at 2000 Hz, it is ahead by 0.2 ms, at 4000 Hz, ahead by 0.5 ms, and at 8000 Hz, ahead by 1.0 ms. The significantly better result at 8000 Hz is explained by the fact that MotionSync is disabled at that polling rate due to the PAW3395 used on the ALPHYN AM10 struggling to maintain 0.125 ms intervals at 8000 Hz with MotionSync enabled. In wired mode, polling is stable throughout, and the target interval is averaged across the board. Click latency in wired operation is difficult to determine due to unusually high run-to-run variance, leading to results landing anywhere between 0.4 and 0.7 ms, with above average standard deviation. These numbers certainly aren't bad, but the lack of consistency is not ideal.
Wireless operation fares rather poorly on the ALPHYN AM10. Polling stability is a very mixed bag: roughly half of the time, polling will be stable, yet during the other half, off-period polls abound. From what I can tell, this happens independently of settings such as RGB lighting and is simply subject to random chance. In terms of motion delay, the ALPHYN AM10 is behind the G403 by 3 ms at 1000 Hz, which simply isn't competitive, and falls far behind the competition from Razer or Logitech. Click latency testing was complicated by the fact that LDAT, which otherwise is used for this task, refused to work with the ALPHYN AM10 in wireless mode, which is why I had to resort to XLAT instead. Using XLAT, I've measured an average of roughly 1.7 ms, which is pretty good but nothing outstanding. Of note is that the ALPHYN AM10 appears to do without any debouncing for the main buttons, resulting in frequent slam-clicking, that is, inadvertent button actuation upon resetting the mouse. Since there is no added debounce upon lift-off either, slam-clicking is the inevitable outcome, though I've found this to not be particularly noticeable during actual use. Still, considering the lack of proper debouncing, the click latency shown by the ALPHYN AM10 isn't anything special.
As one would expect, the ALPHYN AM10 comes with the full assortment of RGB lighting. PowerColor cites up to 50 hours of battery life, but makes no mention whether this applies to 2.4 GHz wireless or Bluetooth, and with or without illumination. A battery life indicator using increments of 10% is present in the software, and after more than five hours of continuous usage at 1000 Hz and with full illumination at 100% brightness, the indicator still showed 100% charge. As such, we can infer that at least 50 hours can be expected, even with full RGB lighting. Given the presence of a 500 mAh battery and the restriction to 1000 Hz, this is indeed largely within expectations. The charging speed deserves a positive mention on the ALPHYN AM10, which lands just under 0.5 A. Since the cable is decently flexible as well, the charging experience on the ALPHYN AM10 is basically seamless, which is great.
Not so great, however, is the software. Dubbed "KeyStone," the software not only is somewhat resource-heavy at a RAM footprint of 120 MB, it more notably suffers from stability issues. When I first launched the software, I was immediately taken aback by how none of the settings seemed to work correctly. Only after exiting the software completely and resetting to defaults did the settings finally display and work correctly, although this faulty state resurfaced at later points yet again. In addition, the software has a rather nasty habit of crashing when trying to launch, to where it sometimes requires multiple attempts to even make it into the software. In terms of UI, KeyStone also leaves something to be desired. For CPI adjustment, any value may be entered, but only native ones will actually take effect, and since non-native values aren't truncated to native ones, those not knowing what the native values are or how this all works will inevitably be left scratching their head. Truncating non-native values is an easy way of giving feedback to the user that an input is not correct, yet this sort of response is completely absent on the ALPHYN AM10 software.
At $69.99, even with these flaws, making a case for the ALPHYN AM10 might be possible, but unfortunately it retails for $99.99. At that price point, the ALPHYN AM10 has a hard time relative to the competition, as the $69.99
Razer Basilisk V3 Hyperspeed is better on virtually every level, yet more affordable. Between weak wireless performance, an unimpressive weight, and buggy software, the ALPHYN AM10 simply doesn't offer anything unique or special that would make it worth picking up over competing options. Despite the above average price tag, the ALPHYN AM10 also lacks any kind of accessories—one gets the mouse, charging cable, and dongle, and that is it. No spare feet, no wireless extender, nothing—and while the Basilisk V3 Hyperspeed too doesn't have a wireless extender, it is of course offered for $30 less. As such, I cannot recommend the ALPHYN AM10.