PowerColor Factory Tour - How Graphics Cards Are Made 45

PowerColor Factory Tour - How Graphics Cards Are Made

(45 Comments) »

Introduction

PowerColor Logo

TUL is an ODM powerhouse that has completed 25 years in business, specializing in logic boards and integrated manufacturing of a variety of PC and consumer electronics products, most notably the PowerColor brand of graphics cards. The company also specializes in Embedded computing products for industrial applications, as well as home IoT products, all manufactured in their factory in New Taipei City, PowerColor recently commissioned their third factory dedicated to graphics card manufacturing, and invited us for a tour, with unrestricted photography access to all key stages of the manufacturing, and the various machinery in use on their production line.



PowerColor is a major graphics card manufacturer and a brand popular among gamers and PC enthusiasts, for their custom design AMD Radeon graphics cards, which are sold under several recognizable brand extensions, such as Red Devil, Hellhound, and Fighter. The company is at the cutting edge of integrated manufacturing, and this new facility uses the latest industrial standards to ensure graphics cards meet the highest manufacturing quality standards. At every stage, there are numerous quality and validation checks before the next stage. There's also a department to look into what exactly went wrong with a graphics card that has been returned for RMA. In this special feature article, we'll walk you through the effort it takes for PowerColor to put together your next Radeon 7000-series graphics card.


PowerColor and its parent company TUL Corporation, went into business in 1997. The company has had a long affiliation with ATI (later AMD), they even made some NVIDIA cards a long time ago. Our tour of their factory begins with a large showcase with samples of graphics cards they've made over these last 25 years. We see some very noteworthy pieces of graphics card history that PowerColor has been a major part of, and we've actually reviewed or owned many of those.


Before we were taken to the actual manufacturing and testing facilities, we were given a brief corporate presentation on what TUL Corporation manufactures in this facility, and what the production workflow essentially looks like. You may know PowerColor for making gaming graphics cards and MXM modules (notebook graphics cards), but did you know, they also make FPGA cards, motherboards, external graphics card enclosures, video signal management equipment, Thunderbolt and USB docking stations; and M.2 NVMe SSDs? Of course, not all of this is sold under the PowerColor brand, TUL has other brands, and also does ODM/OEM activity. The production capability on line 1 at the new facility stands at up to 2,400 PCBA (PCB assemblies) a day, and the ability to manufacture up to 1,440 finished high-end graphics cards, such as the RX 6900 or 7900 XTX.


The manufacturing steps at this facility involve testing the quality of the various electronic and non-electronic components making up the graphics card, the assembly line, where components are placed on the bare circuit boards, and the final production, where the finished PCBs are mated with the non-electronic components (such as heatsinks and backplates), before packaging. This is easier said than done, and each stage of manufacturing involves a painstaking level of quality control. It costs the company a lot more money to deal with a defective graphics card that's been returned after sale, than to invest in a high degree of quality control that can prevent those manufacturing defects from appear in the first place.

This presentation also let PowerColor show off the various makes and models of its key manufacturing machines. While some of these are as small as dishwashers and others the size of a hatchback car; these are all supremely expensive electronics manufacturing machines, and PowerColor certainly spent millions setting up a single assembly line in this facility. The vacant floor-space in the facility is room for PowerColor to add more production lines in the near-future.

Incoming Components Testing and Validation


Before PowerColor can begin manufacturing anything, it needs to know if it has all the parts that go into making them in the required quantities, and of the required quality. Most of the electronic components you find on PCBs are surface mounted devices (SMDs), which arrive either in reels or trays. The reel looks similar to a cinema film reel, where instead of frames, you have SMD components stuck onto them. These reels are fed to PNP (pick and place) machines that picks out each part, and place them onto its designated location. Trays are meant for larger devices that are too delicate to be shipped in reels, such as the GPU chip itself. But before the reels or trays can be fed to the PNP machines, PowerColor checks if the correct components have arrived at the material staging area, and if they're in the right quantity.


A machine is feed SMD reels, and it uses X-ray to determine the quantity of SMDs on that reel. It assigns a unique identification for that reel, which it prints on a barcode label and places on the reel. This will let all machines down the production line know exactly what's on that reel, so it can be optimally utilized.


A chemistry lab is set up by PowerColor to check if any of the individual input materials has hazardous substances on them as defined by the various global standards, such as RoHS. This step is crucial, as it lets the company isolate specific components that would otherwise be responsible for the entire finished product failing a hazardous materials test by a government testing agency, which could lead to an entire shipping lot being denied import—a very costly outcome. Also, if they switch out even one screw, or other minor component, they'll have to make sure that new components passes all validation checks.


Although not part of the assembly line, we took a brief detour to see the lab that receives graphics cards that have been returned by end-users as RMA. PowerColor engineers meticulously disassemble each returned graphics card to determine its exact cause of failure. The company can then decide what to do with the card—attempt to refurbish and supply as a refurbished graphics card; or salvage what it can. Across the room, we spotted trays of GPU ASICs salvaged from graphics cards sent in for RMA. If the GPU itself survives a testing/validation process, it would be fit for a refurbished graphics card.


Here we see an engineer attempt to give a GPU ASIC a fresh set of BGA pins (balls). We were surprised that this is a fully manual process. An RMA is extremely costly for the company, as not only did it have to spend money making the original graphics card, but also to bring it all the way back in the opposite direction of the supply-chain, so the company spends heavily on quality control that prevents manufacturing defects and their subsequent RMAs.


PowerColor doesn't manufacture its PCBs. There are companies that specialize in PCB manufacturing to PowerColor's exact device-specific design and specifications (such as their required PCB layer count, copper layer thickness, special surface treatments, etc). Bare PCBs have no components placed on them, just exposed pads for the various SMDs, mount-holes, and vias. Ideally, PowerColor would want incoming PCBs to be perfectly flat. A flat granite surface lets QA see this. PCBs with bends have to fall within a certain bend tolerance (in this case 1.18 mm), beyond which the PCB is rejected.

The Assembly Line


You don't just walk into the assembly line. You are made to wear certain clean-suits. These are not as stringent as the PPE suits worn in semiconductor foundry clean-rooms; but still you end up better dressed than a surgeon at a hospital. Once you've donned the clean suit, which includes grounded-footwear, headmasks, (and face masks if you intend to get too close to the machinery); you are tested for your ESD potential. Once that's cleared, you enter a special chamber where a blast of air decontaminates most particulate matter off your surface.


You then enter an otherworldly place to the sound of machinery intricately placing components on PCBs. The air-quality is easily on-par with that of an ICU.


The PCB is the foundation of the graphics card. It's the main real-estate where the various components are wired to each other, to make the device work. PCBs arrive in vats filled with anti-ESD packaging that have in-situ chemical strips to tell you how much moisture or other elements that the PCB has been exposed to. Right next to the vats with the PCB, are vats filled with trays of the actual GPU ASICs. A GPU is a large component with exposed dies, and cannot be shipped in reels, so it arrives in trays instead. Each of those silver foils contains anywhere between 20 to 60 GPUs, depending on the size of the GPU package. This is AMD's scope of delivery to its board partners, besides reference PCB designs, reference BIOS, and QVLs for compatible components.


The first machine on the assembly line is fed PCBs and solder paste, which it applies precisely to all the soldering points of the PCB. It does this using a stencil that corresponds with all the soldering points of the PCB. A large dispenser arm pours solder paste over the stencil, which ensures it's applied on precise locations. After this stage, a laser-optic scanner inspects the PCB to see if the solder is correctly applied (in the right measure), and shares its findings with the previous machine, so it can correct flaws for subsequent PCBs. A PCB with major flaws in solder application is ejected, so it can be manually cleaned up and re-processed by the previous machine.


We now move onto our favorite machines in the entire factory, the PNP (pick and place). This is possibly also the most expensive machine. After application of the solder paste, PCBs that pass inspection are vestibulated to the PNP machines.


Each of these machines has two armatures that move along three axes, picking up components from reels, and placing them where they need to be on the PCB. The smallest SMDs are placed first, and then moderately sized ones (such as larger capacitors, inductors, connectors, etc., and finally the largest components that are fed to the machine in trays (such as the GPU ASIC). When at work, a PNP machine's armature sort of sounds like an inkjet printer.


After the PCB goes to several PNP machines dealing with the various components, it goes through the convection reflow oven, where specific regions of the PCB are subjected to specific temperatures that cause the solder to melt and cool, and for the component to solder onto the PCB. As you've probably guessed by now, a graphics card PCB has SMDs on both its obverse and reverse sides, and so the PNP process is repeated for both sides before being sent to the oven.


The component PNP process is where statistically, the highest number of manufacturing defects are prone to occur, and so PowerColor invests in stringent quality control for this stage. An X-ray scanner inspects a PCB to check whether all components are soldered correctly, particularly those components such as the ASIC and DRAM chips (components with BGAs), that cannot be visually inspected for defects. X-ray also allows line engineers to inspect vias and connections within the various PCB layers. After this, the PCB goes through additional stages of manual inspection.
Our Patreon Silver Supporters can read articles in single-page format.
Nov 20th, 2026 04:31 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts