Technology & Positioning
With the Samsung 9100 Pro, Samsung has finally launched a high-end PCI-Express 5.0 consumer SSD. While the company had the 990 EVO on the market for a while that drive is limited to PCIe 5 x2. On the 9100 Pro flagship you get the full PCIe 5 x4 bandwidth, reaching up to 14.2 GB/s, which is the highest we've ever seen on any SSD. Peak write speeds are equally impressive, 13.3 GB/s, a new record, too. Internally, the Samsung 9100 Pro uses the new "Presto" SSD controller, which is fabricated using a 5 nanometer process at Samsung's own foundries. The NAND flash is 236-layer 3D TLC V-NAND V8. Unlike many other value SSDs, the 9100 Pro comes with 2 GB of DRAM cache.
Samsung has a unique advantage that only a few competitors possess: the ability to manufacture an entire SSD using only in-house components. This capability not only streamlines logistics but also reduces manufacturing costs. Additionally, by sharing knowledge across different divisions, Samsung can ensure that each component is precisely tailored to meet the specific demands of the final product.
Synthetic Performance
The 9100 Pro did well in our synthetic testing. For sequential transfers it's a good deal faster than even the best Gen 5 SSDs, even at low queue depth. Random reads are also at the top, but by a smaller margin. Random writes are just 7th place, but what matters much more is real-life testing, because all controllers are optimized for typical synthetic reviewer workloads on a mostly empty drive. Our real-life testing is designed to run actual applications, not disk traces that compress time by assuming infinitely fast hardware and software. We're even running those tests with the drives filled to 85% capacity, not empty. This approach puts additional pressure on the various algorithms and the SLC cache, just like in real-life.
Real-Life Performance
In our real-life tests the Samsung 9100 Pro is a winner, too. It is faster than any other SSD we ever tested and delivers excellent performance in virtually all workloads. The only exception is our WinRAR decompression test, which writes a huge number of small files to the drive. Here the 9100 Pro is surprisingly weak. I reran this test, several times, also with a half-empty drive, no change. When it comes to game load times, the 9100 Pro is the fastest drive on the market—but the differences are very small. Still, very impressive results.
SLC Cache / Sustained Performance
Samsung has configured their drive with an SLC cache size of 474 GB (or 70% in SLC mode), which is enough to soak up nearly all bursts of write activity. Once the SLC cache is exhausted, transfer rates drop quite a lot, to 1.3 GB/s, which is much lower than what I would have expected considering the 9100 Pro's positioning. Filling the whole 2 TB capacity completed at 1.78 GB/s, which isn't impressive either—the Phison E26-based Corsair MP700 Pro does much better here, reaching 2.78 GB/s. Even some high-end Gen 4 drives do better than that.
Power Consumption / Heat
Thermals of Gen 5 drives have always been challenging, with all requiring an active fan-cooled solution, or a huge heatsink, or both. One of Samsung's development focuses was to lower heat output, which requires better energy efficiency. Their new Presto controller is fabricated using a 5 nanometer process, which definitely helps with efficiency. Our power consumption testing shows that efficiency is very good, among the best, but not revolutionary in any way. While it is much better than what the Phison E26 offers, the newer E31 is better, WD's new Gen 4 controller, too. In idle, power consumption is still pretty high with 1.6 W, but that's not that big a deal, because it applies to desktop scenarios only. In a laptop setup, the drive can achieve its lowest ASPM power state, but it is not the most efficient at 0.2 W. The best Gen 4 drives, on the other hand, which are made by Samsung, too, can reduce power consumption to 0.02 W—just a tenth of that, which definitely helps with battery life. With a maximum power draw of 8 W, the drive runs at much lower power than the Phison E26, and is still faster—very impressive. You still need a decent heatsink, the bare drive throttled fairly quickly with a stress-test workload. With lighter activity the 9100 Pro will run fine without heatsink and there will be some occasional throttling when heavily loaded, which is OK for many consumer scenarios. Power users should definitely install a cheap aftermarket heatsink, it will help a lot. While read speeds remain fairly decent during throttling, write speeds are somewhat low.
Pricing & Alternatives
High pricing is nothing new for people desiring PCIe Gen 5 drives, but Samsung wants $300 for the 9100 Pro 2 TB. This makes it the most expensive Gen 5 drive on the market. Competing Phison E26 14 GB/s drives sell around $280, including an actively cooled heatsink, and the 9100 Pro is still faster and runs without a fan, so maybe the high price isn't completely unjustified. On the other hand, the best Gen 4 SSDs won't be much slower, but much cheaper, unless your focus is on sequential transfers. The strongest alternatives here are the WD SN7100 ($140), Samsung 990 Pro ($165), WD SN850X ($140) and of course the MaxioTech MAP1602 drives like the Lexar NM790 ($130).