ssupd Meshroom S Review 30

ssupd Meshroom S Review

(30 Comments) »

Introduction

ssupd Logo

I would like to thank ssupd for supplying the review sample.


The original Meshlicious turned quite a few heads when it was first released, being from an exciting new brand with prominent Lian Li backing, and providing a refreshingly different take on a SFF chassis. Since then, there hasn't been much news around the brand with well over a year of no new products. This changes with the premiere of the Meshroom S. Although having a different name, the enclosure is an improved iteration of the Meshlicious with numerous changes externally and internally. Additionally, it is available in four different colors, with the Sage Green version up for review. Last, but certainly not least, ssupd has ditched the glass variant to exclusively offer full mesh enclosures with the Meshroom S.

Specifications

ssupd Meshroom S
Case Type:SFF Chassis
Material:Steel
Weight:3.2 kg / 7.05 lb
Slots:4 (long GPU), 3 (short GPU)
Drive Bays:Full length GPU: 3 x 2.5" SSD; small form factor GPU: 7 x 2.5" SSD
Max 2 x 3.5" HDD (with small form factor GPU)
Motherboard
Form Factors:
Mini-ITX/Mini-DTX (M-ATX or ATX with optional PCIe cable)
Dimensions:247 mm x 167 mm x 362 mm
Front Door/Cover:N/A
Front Fans:2x 120 or 2x 140 mm (optional)
Rear Fans:N/A
Top Fans:1 x 120 mm x 15 mm thick (GPU max length : 317 mm) (optional)
Bottom Fans:N/A
Side Fans:2x 120 mm
Front Radiator:240 mm / 280 mm
Rear Radiator:N/A
Top Radiator:N/A
Bottom Radiator:N/A
Side Radiator:240 mm
I/O:1x USB 3.2 Gen2 Type-C
2x USB 3.0
Fan/LED Controller:N/A
Compatibility:CPU Cooler: 3 slots GPU mode: max 73 mm height/4 slots GPU mode: max 53 mm height
GPU - 4 slot mode: max 336 mm length (316 mm with ATX)
GPU - 3 slot mode: max 332 mm length (307 mm with ATX)
PSU: Up to 170 mm ATX PSU (with front fan only), up to 160 mm ATX PSU (with upward tubing AIO), 140 mm ATX PSU (with downward tubing AIO)

Packaging


The chassis ships in a plain brown box with simple branding. Included is a specification table and small sticker to inform you which variant of the Meshroom S you received.


Two Styrofoam spacers hold the case in place, and a plastic bag has been placed over the assembly as protection from scratches and fingerprints.


We were also sent the 25 cm PCIe ribbon cable, which you'll need when going beyond the ITX form factor. The Meshroom S officially can support M-ATX as well as ATX cases, but you will really need to plan ahead to make all the parts work well together. The ribbon riser cable shipped to us in a plain brown box with a blacked out name and no additional information. Even the online manual goes into no real detail besides a single image - something ssupd should improve upon.

Our Patreon Silver Supporters can read articles in single-page format.
Nov 21st, 2026 11:04 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts