It was a little over a year ago when we took a look at Swiftech's MCP655-PWM pump, which was a Laing D5 pump with a reworked PWM motor for better compatibility with PC DIY watercooling. As a standalone pump, that product was impressive and remains a good buy for those looking at one. Swiftech then took the logical step of integrating it into a reservoir and pump combination, and unveiled the new generation of their Maelstrom Reservoirs at CES 2018; a series of reservoirs of varying lengths to suit most customers, these were released to the market recently. Thanks to Swiftech, we now have a review sample to examine in more detail.
Coming in options of 50, 100, 200, and 300 mm in length, the Maelstrom D5 Reservoir series can be viewed as an extension of the standalone pump if it had a taller top. But that merely understates all you get here with integrated addressable RGB LEDs and thick glass sections in a rectangular cuboid form factor for the reservoir. It has a look similar to Watercool's new Heatkiller reservoir, but does not have the corner struts and thus appears cleaner with a single material composition otherwise. The image above also tells us that the numbers corresponding to the specific SKUs are not the overall length of the product but, rather, that of the reservoir section above the pump and pump top—account for this and add 80 mm to get the overall dimensions to figure out whether this would fit into your case or not. Let us begin the review with a look at the specifications below.
Swiftech operates a web shop in the USA, from wherein this sample came, and as such, we begin with a look at the shipping packaging. An appropriately sized box has been chosen, with over an inch of space on all sides and packing peanuts all around the product box as well. An excellent start!
The product packaging is in a similar design scheme as the rest of their products, with a glossy black background and very few details otherwise. There is the company logo on front, and a label on the back identifies the product inside, along with some salient technical specs listed, but that's about it. As seen in the images above, there is a seal on one side to help keep the contents inside in place.
Opening the box, we see a sheet of thin soft foam adding further protection to the product inside. Underneath is the reservoir itself, with more foam sheets on the sides and the accessories alongside it as well. Everything is packed snugly to prevent any movement inside the box during transit. The provided accessories include an installation guide (online version here) common to all the Maelstrom D5 reservoirs from Swiftech, two metal mounting brackets with pre-cut holes, and the rest of the installation hardware, including metal M4-threaded screws, nuts, and washers. There are two separate lengths of screws used to help distinguish the different applications for each set, and it must be noted here that the screws have a hex head, although no Allen key is provided to aid in their application. I had a discussion with Swiftech about this, and they agreed that this is a shortcoming to where they are going to henceforth include an Allen key in the packaging.