Output Noise
We used a CEM-8852 Sound DB Meter we installed 50 cm away from the NAS for these measurements. Ambient noise in our lab was below 30 dBA while these noise measurements were taken.
These fans actually produced less than 30 dBA, but the vibrations the HDD trays caused increased noise output to 33 dBA. While 33 dBA may be pretty low, such high-pitched noise as these vibrating HDD trays cause can be very annoying if you have to listen to it over prolonged periods of time. Thankfully, there is an easy fix since you only have to attach some noise-absorbing material onto the four internal corners of each tray, but Synology should have done so in the first place. It is a real shame to come across such silly design faults in a high-end NAS that would normally come with higher quality trays.
Output Noise Comparison Graphs
The following graphs show the DS1815+'s output noise, comparing it to other units we have tested in the past.